Supermicro SYS-5018A-TN7B 1U Short-Depth Barebones Server, NEW IN STOCK 5 Yr Wty
Product SKUsSYS-5018A-TN7B

• SuperServer 5018A-TN7B (Black)

Motherboard
Super A1SRM-LN7F-2758Processor/CacheCPU

• Intel® Atom™ Processor C2758
• CPU TDP 20W (8-Core)
• FCBGA 1283
• 4x 240-pin DDR3 UDIMM slots
• Supports up to 64GB DDR3 ECC or non-ECC memory

Memory Type

• 1600/1333MHz ECC or non-ECC DDR3 SDRAM, 240-pin gold-plated DIMMs, x8 width only

DIMM Sizes

• 16GB, 8GB, 4GB, 2GB

Memory Voltage

• 1.5 V, 1.35 V

On-Board DevicesSATA

• SoC SATA3 (6Gbps), SATA2 (3Gbps)

Network Controllers

• Quad GbE LAN w/ Intel C2000 SoC i354 - 2 pairs LAN bypass
• Single GbE LAN w/ Intel i210-AT
• Dual GbE LAN w/ Intel Ethernet controller i350-AM2 - 1 pair LAN bypass

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Aspeed AST 2400 BMC

Graphics

• BMC integrated ASPEED AST2400

USB 2.0

• C2000 SoC

Input / OutputSerial ATA

• 2x SATA3 (6Gbps) ports
• 4x SATA2 (3Gbps) ports

LAN

• 7x RJ45 Gigabit Ethernet LAN ports with shared LAN IPMI 2.0

USB

• 7x USB 2.0 ports (4 rear, 1 Type A, 2 via header)

Serial Port

• 2x Fast UART 16550 Serial Port (1 rear with RJ45, 1 via header)

DOM

• 1xSATA DOM(Disk on Module) power connector
• 1xSuperDOMSupermicro SATA DOM with built-in power connector

VGA

• 1x VGA Port

Others

• TPM 1.2 header

ManagementSoftware

• SuperDoctor® 5
• Watch Dog
• NMI

Power Configurations

• ACPI / ACPM Power Management
• Main Switch Override Mechanism
• Power-on mode for AC power recovery

PC Health MonitoringVoltage

• Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages.

FAN

• Total of 3x 4-pin fan headers
• 3x fans with tachometer status monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Low noise fan speed control
• Pulse Width Modulated (PWM) fan connectors

Temperature

• Monitoring for CPU and chassis environment
• CPU thermal trip support

LED

• System Overheat LED

Other Features

• Intel® QuickAssist Technology
• 3x pairs software programmable GbE LAN Bypass ports

ChassisForm Factor

• 1U Rackmount

Model

• 1.7" (43mm)

Width

• 17.2" (437mm)

Depth

• 11.3" (287mm)

Package

• 6.1" (H) x 25.4" (W) x 19.8" (D)

Weight

• Net Weight: 8.45 lbs (3.83 kg)
• Gross Weight: 12.55 lbs (5.69 kg)

Available Colors

• Black

Front PanelButtons

• Power On/Off button
• System Reset button

LEDs

• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Information LED (temp., status)

Expansion SlotsPCI-E

• 1x PCI-E 2.0 x4 (in x8) slot

Drive BaysHDD

• 1x 3.5" or 4x 2.5" (opt. bracket required) internal drive bays

System CoolingFans

• 2x 4cm counter rotating PWM fans, support up to three system fans

Power Supply200W Low Noise AC-DC power supply with PFCAC Voltage

• 100 - 240V, 50-60Hz, 2.6 Amp Max

+5V

• 8.0 Amp (max.)

+5V standby

• 2.0 Amp (max.)

+12V

• 16 Amp (max.)

-12V

• 0.5 Amp (max.)

+3.3V

• 8.0 Amp (max.)

Certification
Gold Certified
System BIOSBIOS Type

• 128Mb SPI Flash EEPROM with AMI UEFI BIOS

BIOS Features

• Plug and Play (PnP)
• DMI 2.3
• ACPI 5.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI

Operating Environment / ComplianceRoHS

• RoHS Compliant

Environmental Spec.

• Operating Temperature:
  10°C to 40°C (50°F to 104°F)
• Non-operating Temperature:
  -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity:
  8% to 90% (non-condensing)
• Non-operating Relative Humidity:
  5% to 95% (non-condensing)

See Parts ListParts List - (Items Included)
Part / A1SRM-LN7F-2758 Motherboard
1U ChassisCable 1CBL-0061L135CM end to end, SATA CABLE, PB FREE, 26AWG, flatPartsMCP-260-00085-0B11U I/O Shield for A1SRM-LN7F on SC510 with EMI riser card bracket for all 1U chassisRiser CardRSC-RR1U-E81RSC-RR1U-E8 (Rev 4.00)Power SupplyPWS-203-1H11U 200W Multi-output 80Plus Gold PWSRiser card bracketMCP-120-00032-0N1Riser card bracketI/O ShieldMCP-260-00085-0B11U I/O Shield for A1SRM-LN7F on SC510 with EMI Gasket,RoHS/REACH
Vector Data builds rugged, carrier-grade and custom systems.
We use to sell our OEM surplus and to reach customers across the globe.
On-site installation is available for an additional fee. We also accept trade-in's of any systems or data center equipment that you may be trying to get rid of.
Please contact us to have a custom product listing created for you if you require a custom configuration or need a part that is not listed.