Juniper MPN: FPC-PTX-P1-A-B HECI: IP9IAMPDAB for the Juniper PTX5000

You\'re looking at:

Juniper MPN: FPC-PTX-P1-A-B HECI: IP9IAMPDAB for the Juniper PTX5000

FPC Slots

Up to eight FPCs install vertically in the front of the PTX5000. The FPC slots are numbered FPC0 through FPC7, left to right. If a slot is not occupied by an FPC, an FPC blank panel must be installed to shield the empty slot and to allow cooling air to circulate properly through the packet transport router.

FPC Function

FPCs house the PICs that connect the PTX5000 to network media. The main function of an FPC is to connect the PICs installed in it to the other chassis components. The Packet Forwarding Engine receives incoming packets from the PICs installed on the FPC and forwards them through the switch planes to the appropriate destination port.

When you install an FPC into a functioning PTX5000, the Routing Engine downloads the FPC software, the FPC runs its diagnostics, and the PICs housed on the FPC are enabled. Forwarding on other FPCs continues uninterrupted during this process.

FPC Components

Each FPC consists of the following components:

*FPC card carrier
*Packet Forwarding Engines, consisting of Lookup ASICs and the Queuing and Memory Interface ASICs
*Processor Mezzanine Board (PMB), which includes a 1.2-GHz CPU, 4 GB of SDRAM, and two Fast Ethernet interfaces
*Two LEDs on the FPC that display the status of the FPC
*FPC online/offline button

Under 30 day warranty

ThereareNO:software, cables, manuals, oraccessories

*Customer satisfaction is our first priority!*

- If you encounter any problem with the item you purchased please contact us before you open a case!

- We will make it right faster than the case processing time!

-Please contact us if you would like to return the item you purchased. We will provide you RMA#

//SMTCORP//COM

You may be interested in our other items.

Returns

Buyer will never pay return shipping for the following reasons:

- DOA
- Defective
- Damaged
- Not as Described

Buyer pays all return shipping, taxes and duties if returned for any reason not mentioned above.

This includes the purchase of the wrong item by mistake.
Certain items with High Market Value Volatility are subject to a 10% Re-stocking fee at SMT Corp\'s discretion.

Wephotograph, record serial numbersand document everything. We are honest, hardworking and pride ourselves on our Excellent Customer Service and 24hr Handling Time.

**Customer satisfaction is our first priority!**
If you encounter any problem with an item you purchased please contact us before opening a case, we will make it right faster than the case processing time - (Within 24 hrs.)

If you would like to return an item purchased within the 30 day warranty period, please contact us direct.
We will issue youan RMA, upon receiving the product back it will go through inspection against prior out going photos, etc. The buyer will be fully refunded, or offered a replacement. Solely at the \"buyer\'s\" discretion.

Local Pickup
We offer local pickupbetween thehours of 9:00am and 4:00pm, purchases will only be released directly to the buyer and will requirethe buyer\'s signature upon pickup.

Shipping Calculations
Shipping is calculated by zip-code please use the calculator provided at the top of the listing.

Freight Quotes
Call or Email for assistance with freight quotes. //smtcorp//com.

** International Buyers Please Read Below Prior To Purchase**

Orders shipped outside the continental US are possiblysubjected to additional taxes, duties and other fees.
Buyers should please check with their local customs office, and their countries import regulations to be sure their aware of any associated fees.
SMT Corp is not responsible for any ofthese charges. Please note that we will not accept back, or issue refunds on items that are sent out and denied due to these charges.

SMT Corp cannot ship any items that are classified as \"MIL-SPEC\"to international buyers or brokers with final destinations outside the Continental United States. \"MIL-Spec sales require signed end-user documentation that will be provided to the buyer at the time of purchase.\"

Payments
Payment is due at the time of purchase, non-payment cases will automatically be handled by \'s unpaid item assistant.

All Connecticut local pickups and shipments are subject to a 6.35% sales tax. For tax exemption pleaseCall or Email tosubmit a completed Connecticut Sales and Use Tax form.

We accept PayPal and most major credit cards.

Powered by SixBit\'s eCommerce Solution