PET & PEI Show Video

PEO Material

Good adhersive on model,especially for PLA;

Beautiful patern on model;

High temperature resistant;

After our extensive testing, we recommend PEO side to print PLA and TPU and PETG.

PEI side print PLA /PETG/PC/ABS /TPU /Nylon etc.

Aplication

1. 220x220mm for:

Anet A8 / Wanhao Duplicator i3/Monoprice Maker or other similarly sized hotbed.

2. 235x235mm for

Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3 v2/

CR 20/CR 20 Pro/Ender 5 / Ender 5 Pro or other similarly sized hotbed

3. 310x310mm for

Artillery SW-X1 /SW-X2/CR-10/CR-10S

/Tevo Tornado/ Nereus/Anet A8 Plus/E12 or other heated beds of the same size

Advantage:

1. Double-sided printing, convenient and practical

2, High temperature resistance, scratch resistance, no deformation

3. No glue, easy to use

4. Anti-warping and strong stickiness

5, Stainless spring steel, good flatness

6. The printed model can be removed without the help of other tools, can be bent and returned to a flat state, no

loss mode

7. Easy to clean, just wipe it off with a wet tissue or alcohol before printing

Instructions:

1. For the first printing, it must be leveled (the distance between the nozzle and the hot bed is generally A4 paper thickness)

2. Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles

3. Adsorb the PEI side or the PEO side spring steel plate on the magnetic base

4. Start printing, the temperature of the hot bed can be set to 40°C-80°C according to the actual situation (do not exceed 80°C)

5. Take off the printing surface and bend it gently to achieve easy demoulding

Packing list

Option 1:

PEO+PEI printing surface with magnetic base

PET+PEI printing surface with magnetic base

PEI+PEI printing surface with magnetic base

Option 2:

PEO+PEI printing surface without magnetic base

PET+PEI printing surface without magnetic base

PEI+PEI printing surface without magnetic base