Product detail:
Name:
Double Side Magnetic Spring Steel Sheet Round 220/240/265mm PET sheet, 180/220/235/257/241/300/310/350mm PET/PEI/PEO Coated Textured Smooth Flexible Hotbed Plate Sheet For Ender-3 CR10 ( with or without magnetic base )
Size and Applicable printer：
Square Sizes:
180x180mm: Kingroon KP35 Prusa Mini
220x220mm: Anet A8/Wan hao Duplicator i3
235x235mm: Ender 3/Pro/3S/5 S1/ CR20
257x257mm: Bambu lab x1
241x254mm: Prusa I3 MK3s
300x300mm: KingroonKP5L
310x310mm: Artillery Sidewinderx1x2
350x350mm: FYSETC Voron 2.4
Round Sizes :
220mm, 240mm, 265mm, for the printer which with 220mm, 240mm, 265mm hotbed.
Except above model and also use for other similarly sized hotbed.
If you are not sure which size match your hotbed, please measure again before you place a hotbed sheet.
Print Instructions:
1. When first time printing, keep the built sheetsmoothing(the nozzle and the hot beddistance adjust to A4 paper thickness).
2. Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles.
3. Adsorb the PEI side or the PET side spring steel plate on the magnetic base.
4. we suggested printing temperature: PLA 60℃ PETG 70-80℃ ABS 90-100℃.
Start printingin PET and PEO sheet, the temperature of the hot bed can be set to 40°C-80°C according to the actual situation (PEO/PET do not exceed 80°C).
PEI sheet can bework in 160°C~180°Cfor alongperiodoftime, PEI can not over200°C.
5. Take off thesheet from printing surface and bendthe sheetslightly,you can easy to take the model.
Note 1:
DO NOT USE ACETONE ON POWDER COATED PEI SIDE!
Note 2:
Ifyou are going tobuyaproductwithoutmagneticbase,
Package including:
1. Without magnetic base: one piece Spring Steel Build PlateSheet.
2. With magnetic base: two pieces, one piece Spring Steel Build PlateSheet+one magnetic rubberbase.
PET Surface:
one side is smooth PET surface, another side is textured PEI surface.
Round Surface:
one side is smooth PET surface, another side is textured PEI surface.
PEO Surface:
one side is smooth PEO surface, another side is textured PEI surface.
PEI Surface:
Double side are textured PEI surfce .
Smooth PEI Surface:
one side is smooth PEI surface, another side is textured PEI surface.
PET Exploded diagram
About product:
Three layer material in the exploded diagram PET+Spring steel plate+PEI combine to one buildplate sheet, it is the surface(A).
The structure of material for PEI and PEO are same with PET.
Maintenance
Wipe the print surface before and after a print with Isopropyl alcohol to maintain a clean surface for maximum bed adhesion strength. As with any build surface, make sure you are not printing too close to the bed to avoid possibly infusing the filament into the build surface. If printing PETG, TPU, TPE, and RYNO, make sure the bed is heated BEFORE attempting to remove the print from the bed.
