BIGTREETECH Manta M8P V1.1 Control Board 32Bit, Integrated Motherboard Uses with CB1 V2.2 Support Klipper Firmware, Compatible TMC5160 V1.3/Pro TMC2209 TMC2130 Stepper Motor Driver (Without CB1)

• ⭐BIGTREETECH Manta M8P Control Board uses 32-bit ARM Cortex-M0+ series STM32G0B1VET6 main control chip with a core frequency of 64MHz. High-performance MOSFETs are used to reduce heat generation;
• ⭐The power chip of Manta M8P integrated main control board adopts TPS5450-5A, which supports DC12/24V power input; the output current of this chip is up to 5A, and the peak value can reach 6A, which perfectly supports the power supply of Raspberry Pi.
• ⭐The control board and the core board use BTB connection method, so that other core board solutions other than CM4 can be selected, such as BIGTREETECH CB1. The mainboard reserves the SPI expansion interface for using the Klipper firmware to connect an external acceleration sensor for acceleration compensation.
• ⭐The thermistor can select the pull-up resistance value through the jumper, which supports PT1000 without external modules, which is convenient for DIY use; the control board reserves a three-way four-wire fan interface, which can be used to connect a water cooling device.
• ⭐The MCU firmware can be upgraded through SD card, or through DFU through Klipper\'s make flash command; the main board reserves the proximity switch interface, supports NPN and PNP type selection, (24V, 12V, 5V) voltage optional, shared with VFAN6 Voltage selection.

BIGTREETECH Manta M8P V1.0 integrated Control BoardAdditional Product Features1. The main board reserves BOOT button, can update the motherboard boot program through DFU;2. Increase protection circuit of the thermistor to prevent the control chip from burning due to leakage of the hot bed or heating rod;3. The 24V, 12V, 5V voltage of the CNC fan is optional, which saves the operation of external transformer module, thereby reducing the probability of damage to the motherboard;4. The MCU firmware can be upgraded through SD card, or the MCU firmware can be updated through DFU through Klipper\'s make flash command;5. On-board TMC-driven SPI and UART working modes, on-board DIAG function pins, can be used by simply plugging and unplugging the jumper cap;6. Support material break detection, shutdown, BLTouch, RGB lights and other functions;Product Parameters1. Logic voltage: DC3.3V2. Drive input voltage: 24V, HV optional3. Mainboard input voltage: VIN=DC12V or DC24V4. Hot bed input voltage: BED IN=DC12V or DC24V5. Heating interface: hot bed (HB), heating rod (HE0,HE1,HE2,HE3)6. The maximum output current of the hot bed port: 10A, peak value 12A7. Maximum output current of heating rod port: 5.5A, peak value 6A8. Fan interface: two-wire numerical control fan (FAN0,FAN1,FAN2,FAN3), four-wire numerical control fan (FAN4,FAN5,FAN6), normally open fan (24V FAN*2), among which the numerical control fan voltage (5V,12V,24V) optional9. Maximum output current of fan interface: 1A, peak value 1.5A10. Total current of heating rod + driver + fan: less than 12A11. Temperature sensor interface: 5 channels of 100K NTC, 4 of which are optional ports for NTC and PT100012. Display: SPI touch screen, LCD display13. PC communication interface: Type-C14. Support machine structure: Cartesian, Delta, Kossel, Ultimaker, CoreXY

Shipping

• We offer FREE shipping on all orders!
• We use a selection of shipping services such as UPS, FedEx, USPS etc.
• We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
• Local pickups and combined shipping options are not provided at this time.

Return

• You can return a product for up to 30 days from the date you purchased it.
• Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

Payment

We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!

response

Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.

Contact Us

If you have any queries, please contact us via . We usually respond within 24 hours on weekdays.

Please visit our store to check out other items for sale!

Thank you for shopping at our store.