This unit arrives tested working with a 1 year hardware warranty.
1x Juniper MPC5E-100G10G -MPC5E-100G10G MPC, price includes full scale L2/L2.5, reduced scale L3 features, up to 2M routes in the FIB, up to 6M routes in theRIB, and up to 32 L3VPN instances per card; requires optics sold separately.
HECI: show interfaces terse | match et-et-1/1/0 up downet-1/3/0 up down
root> show chassis fpc pic-status
Slot 1 Online MPC5E 3D 2CGE+4XGE PIC 0 Online 2X10GE SFPP OTN PIC 1 Online 1X100GE CFP2 OTN PIC 2 Online 2X10GE SFPP OTN PIC 3 Online 1X100GE CFP2 OTN
root> show chassis fpc errorsFPC Level Occured Cleared Threshold Action-Taken Action1 Minor 0 0 10 0 LOG| Major 0 0 1 0 GET STATE|CM ALARM| Fatal 0 0 1 0 RESET

Hardware features

• Line-rate throughput of up to 240Gbps

• Supports up to 32,000 queues per-slot

• LAN-PHY mode at 10.3125Gbps on a per-port basis

• WAN-PHY mode at 9.95328Gbps on a per-port basis

• Supports maximum transmission unit (MTU) size of 9,192 bytes for host bound packets. For Junos OS 16.1R1 and later releases, the MTU size supported is 9,500 bytes.

• The ports are labeled as:

  • 10-Gigabit Ethernet ports:0/0,0/1,2/0, and2/1

  • 100-Gigabit Ethernet ports:1/0and3/0

• The MPC5E supports the enhanced Switch Control Board (MX-SCBE) and MX-SCBE2 on MX240, MX480, and MX960 routers. The MPC5E does not support the legacy SCB (MX-SCB). The MPC5E supports the Switch Fabric Board (SFB) on MX2010 and MX2020 routers.

• MPC5E does not interoperate with the existing DPCs, except the Multiservices DPC (MS-DPC).