Product Description:
The iU3D has always paid attention to product quality.We choose the best materials that can be found in the market, coupled with high-precision CNC machining,and strict quality assurance can bring this high-quality HOTEND.We believe that only high-quality products can guarantee the quality of your work.Please believe in our quality and believe that you will not regret when you receive the goods.
Brass Nozzle:
We choose the best materials that we can find on market combined with high precision CNC maching to bring this high quality brass nozzle (Tolerance 0.01 mm),Sleek Inner Wall,Smooth filament feed-out Less glitches Lower viscosity. Brass Nozzles High cost performance, Suitable for printing PLA ABS TPU PA and other conventional materials.
Hardened steel nozzle:
The Hardened steel nozzle,each of which is molded by five axle CNC.Strict quality control enables it to possess Higher temperature,Higher Wear Resistance,Better Durability,More Precise (Tolerance 0.01 mm).Can be perfectly compatible with special filaments such as PEI, PEEK, PETG, Carbon Fiber Mixture,Glass Fiber Mixture, Filled PLA or Glow-in-the-dark filament.
If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament,special filaments then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles.We've developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the marke.
Plated Copper Nozzle and Heater Block:
The Plated Copper Nozzle and Heater Block are engineered for ultimate high temperature performance.Made from a special high temperature copper-alloy with a softening point of well above 500°C,and with much-increased thermal conductivity.This Plated Copper Nozzle is perfect for high temperature applications,while working perfectly with all filaments,including PLA, ABS, PETG,TPU,PP,PC,PA,Nylon,PEEK,PEI and composite materials containting abrasive additives,such as carbon fiber,steel,wood,boron caroffere,tungsten etc.
The Plated Copper Nozzle and Heater Block have the characteristics of high temperature resistant,high thermal conductivity,non-stick surface,reduces the adhesion of filament,nickel based plating is not easy to wear. Making it perfect for the high-temperature 3D printing that other nozzles can't handle.(but is particularly important at temperatures above 280°C where a silicone sock can't be used.)
Titanium Alloy Heatbreak:
The Heatbreak material is upgraded from the original TC4 titanium alloy to GRADE5.High quality raw material.High precision production to provide excellent thermal isolation between heater and cooling block. The Plated Copper Nozzle and Heatbreak appearance is more shiny,thread precision improvement.The inner wall of the tube is smoother (reducing the chance of filament clogging).The interface is smoother and more precise (can effectively prevent the filament from leaking).
The Nozzle and Heatbreak appearance is more shiny,thread precision improvement.The inner wall of the tube is smoother (reducing the chance of filament clogging).The interface is smoother and more precise (can effectively prevent the filament from leaking).
Heatsink:
Our Heatsink is high quality fine processing aluminum .It is not low quality or cheap aluminum.Coupled with high-precision CNC machining, and strict quality assurance which brings the high-quality HOTEND .This product only supports 1.75mm filament!!!▉Compatible:
Compatible with CR-10SCompatible with CR-10S -S5Compatible with CR-10S -S4Compatible with CR-10Compatible with CR-10 -MINICompatible with CR-20Compatible with CR-20 PROCompatible with Ender2Compatible with Ender3Compatible with Ender 3 V2Compatible with Ender3 PROCompatible with TronXY X5SCompatible with Tevo TornadoCompatible with Alfawise U20
Recommended slicer setting:
retraction speed over 80MM/Sretraction length 2.5-4MM
If you are facing PLA clogging problem, please try the followings:1. Increase the retraction speed. The speed may have being limited in the firmware try to change it. G-command "M203 E200"2. Increase the extruder acceleration. Check your firmware settings. G-command "M201 E9000"3. Reduce the retraction length. It depends on your machine setup.4. Increase the nozzle temperature by 5-10 degrees.5. Do not install the 2 screws for support the heatblcok like the stock hotend on the CR-10 printer.6. Make sure that there is no gap between the heatsink and the heat breaker.
Packing list:
MK8 Brass Nozzle or Hardened steel Nozzle or Plated Copper Nozzle1.75/0.4mm x 1Titanium alloy Heatbreak 1.75MM x 1Aluminum Heater Block orPlated CopperHeater Block x 1Aluminium Heatsink x 1Gift：Silicone socks x 1
After sales guarantee:
Each defective item can be replacement for free or refund.If any question, please feel free to contact or QA us, iU3D is committed to providing you with the best service!