UBB Store

White 360mm Aluminum Radiator with 300T 12V Pump and Reservoir for PC Cooling
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
White 360mm Aluminum Radiator with 300T 12V Pump and Reservoir for PC Cooling
Price: US $55.09
White 360mm Aluminum Radiator with 300T 12V Pump and Reservoir for PC Cooling

Entry-level radiator plus pump/reservoir pair. No CPU block, no fans, no coolant.

Ships from ourUSA warehouse— 5 to 10 business days, no customs fees.What you get
  • White 360 mm aluminium radiator
  • 300T 12 V pump with built-in reservoir
Key specsRadiator size360 mm (360 = three 120 mm fans, 240 = two)Fan mounts3 × 120 mmRadiator materialAluminiumColourWhitePump300T 12 V pump with built-in reservoirPower12 V DC — runs from your PSU, not the motherboardPort threadG1/4 — the standard size, any G1/4 fitting fitsWill it fit your case?
  • 360 mm radiator— allow about400 mmof length and120 mmof width inside the case.
  • Depth — radiator thickness plus your fan depth (usually 25 mm). Measure before you buy.
  • Check for anything sitting behind the mounting rail — cables, the PSU shroud, or a drive cage.
What you still need
  • 120 mm fans (3 pcs)
  • CPU block
  • Tubing and G1/4 fittings
  • Coolant with corrosion inhibitor

Listed up front so nothing surprises you on arrival.

Good to know
  • A 240 is not "smaller cooling".The number is just how many 120 mm fans it takes — 360 takes three, 240 takes two.
  • Thin radiators suit tight cases.A slim core with good fans often beats a thick one in a small build.
  • Never mix copper and aluminiumin the same loop without an anti-corrosion coolant. They corrode each other.
  • Use distilled water plus biocide, or a ready-mixed PC coolant. Tap water will eventually clog the loop.
  • G1/4 is universal.Fittings from any brand will thread into these ports.
Install, in short
  1. Flush the radiator with distilled water before fitting — loose manufacturing residue is normal.
  2. Mount the radiator, then fit your fans. Screws go through the fan into the radiator.
  3. Fill the loop and run the pump for 12 to 24 hours with the motherboardunpowered. Check for leaks.
  4. Only power the system once it has held pressure without a single drop.
Questions

Does the pump have a reservoir?

Yes, the 300T has an integrated reservoir.

Is a CPU block included?

No.

How many fittings?

A CPU loop typically needs six G1/4 fittings - not included.

Pump voltage?

12 V DC.

Fans?

Three 120 mm fans required, not included.

Shipping and returns

Dispatched from our US warehouse. Delivery usually takes 5 to 10 business days. 30-day returns accepted on unused items in their original packaging.



Buy Now