DESCRIPTION
NAS Multi-Functional Mini-Computer Designed For Raspberry Pi Compute Module 4 (NOT Included), Network Storage, Dual Solid State Drive Slots, Dual Gigabit Ethernet Ports, 4G Network, Metal CaseCM4 NAS Mini-Computer Kit

Designed For Raspberry Pi Compute Module 4

Network StorageUSB 3.2Dual Gigabit Ethernet ports4G

* the Compute Module 4 is NOT included.

Features At A Glance

• All-in-one Mini-Computer, mainly designed for home, small home office, etc.
• Provides a simple and easy-to-use solution, no expert knowledge of networking and storage systems required
• Onboard 2× M.2 M KEY slots for installing NVME Solid State Drives
• Onboard MINI PCIE connector for installing 4G module
• 2× HDMI 4K output interfaces
• Onboard USB3.2 ports, IR receiver, RTC, dual Gigabit Ethernet connectors, 3.5mm jack, etc.

SpecificationsCM4 SOCKETSuitable for all variants of Compute Module 4NETWORKINGGigabit Ethernet RJ45 connector × 2 (Original Network port ETH0, and PCIE extended Network port ETH1)MINI PCIE connector, supports 4G module (USB protocol, can not support PCIE protocol)Nano-SIM card slot, supports standard Nano-SIM card for 4G/3G/2G Internet accessM.2Dual NVME Solid State Drives slots (compatible with 2230, 2242, 2260, 2280)USBUSB 3.2 Gen1 (5Gbps) port× 2CSI CAMERAMIPI CSI-2 camera port × 2, 15pin 1.0mm FPC connectorHDMIHDMI × 2, supports 4K 30fps outputAUDIO3.5mm earphone/mic jackRTCReal-time clock with battery socket and ability to wake Compute Module 4TF CARD SLOTTF card socket for Compute Module 4 Lite (without eMMC) variantsPOWER INPUTType-C (5V 4A)DIMENSIONS128 × 122 × 36mmSelection GuideCM4 BASE BOARDINTERFACE COUNT AND SPECIFICATIONSPOEGIGABIT
ETH40PIN
HEADERPOWER
INPUTFEATURES
NANO A√2.0×1×15VCM4 sized
NANO B×1√2.0×1×1×1×15VCM4 sized
NANO C√2.0×1×1×1×15VOnboard Camera
MINI BASE A×1√M.2 M2.0×4×1×2×25V5Vmini size
MINI BASE B×1√M.2 M2.0×4×1×2×2√5V5Vmini size
MINI BASE C×1√M.2 M2.0×2×1×2√5V5VDedicated 40PIN LCD Connector
TOUCH SCREEN×1M.2 M2.0×4×1×15VIPS screen
MINI DUAL GIGABIT×2√2.0×15V SH1.05Vdual ETH
BINOCULAR CAMERA×1√M.2 M2.0×4×25Vdual 8MP
cameras
4CH RS485×12.0×2×1×2×15V7-36Vdual ETH
WIFI6 DUAL ETH×1√M.2 E2.0×3×1×2×2×15/12V7-36VWIFI6 dual ETH
DUAL GIGABIT style="box-sizing: border-box;">IOT DUAL GIGABIT ETH×2√3.0×2×1×2×2√5/12V5V5G/4G support
IOT support
RS232
RS485
ADC
POE BASE style="box-sizing: border-box;">RS485
POE UPS BASE√×1√M.2 M2.0×4×1×2×2√5/12V7-36VUPS
POE style="box-sizing: border-box;">RASPBERRY PI style="box-sizing: border-box;">WIRELESS BASE×1M.2 B /
7-36V5G/4G support
RS485
CAN
rail-mount
UPS WIRELESS BASE×1M.2 B2.0×3×1×1√5/12V5V or
7-36VWith UPS
5G/4G support
RS485
CAN
rail-mount
NAS MINI COMPUTER×2√M.2 M×2/
5″ TOUCH SCREEN②×1√M.2 M2.0×4×1×2√5/12V5V
7″ ALL-IN-ONE×1M.2 M2.0×4used×1used√5/12V
used7-36Vtouch screen
camera
speaker
13.3″ ALL-IN-ONE×12.0×212VHD touch screen
13.3″ MAGIC MIRROR×12.0×212VHD screen,
Speech AssistantNOTE① USB 3.0 is equivalent to USB 3.2 Gen1
② There's PoE header only on the Raspberry Pi official IO board without PoE circuit, that means additional PoE module is required for the official IO board to enable PoE feature.
Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A).Dual Solid State Drives Slots

Onboard 2× M.2 M KEY Slots, Support All Sizes Of NVME Solid State Drives
(2230, 2242, 2260, 2280)

VESA Mounting Support

Supports 100×100mm And 75×75mm Standard VESA Holes

for reference only, the stand and display are NOT included.
Onboard Rich Interfaces
Precise Cut-Out With Clear Label

Each Cut-Out Is Completely Aligned With The Connector

Application Example

Supports Connecting With Multiple Peripheral Devices, Suitable For Various Application Scenarios.

for reference only, please check the Package Content for the detailed part list
Product Show
Installation Instruction

* for reference only, the CM4 is NOT included.

Outline DimensionsResources & Services

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

PACKAGE CONTENT

Weight:0.551 kg

1. CM4-NVME-NAS-BASE x1
2. Metal case (top and bottom, with cooling fan) x1
3. Momentary push button switch ~12mm (with LED and four pre-wired cables) x1
4. 30×40mm Silicone thermal tape x1
5. 15×15mm Silicone thermal tape (2PCS) x1
6. 7×7mm Silicone thermal tape (2PCS) x1
7. Antenna connector rubber plug (2PCS) x1
8. Screws pack x1