 When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Description ESP32-C5 2.8inch IPS capacitive touch display development board, 240 × 320 resolution, 5-Point Touch, 262K color, Integrated 2.4GHz/5GHz dual-band Wi-Fi and Bluetooth 5 (LE) ESP32-C5 2.8inch IPS capacitive touch display development board Integrates SPI interface display, 240 × 320 resolution, multiple peripheral interfaces Version Options ESP32-C5-Touch-LCD-2.8-EN
without Lithium Batt ESP32-C5-Touch-LCD-2.8
comes with a 3.7V Lithium Batt Features This product is designed by Waveshare with onboard 2.8inch LCD display, 6-axis sensor, temperature and humidity sensor, and TF card slot, providing the hardware foundation for display, sensing, voice, and multimedia storage. With these hardware resources, it supports fun interactive mini-games and voice wake-up. It allows access to online AI large model platforms, enabling intelligent voice interaction and continuous upgrades. It comes pre-installed functions such as AI conversation, audio playback, a gravity ball game, 2048 game, and weather. It can be used directly as an AI chatting toy, while also supporting customization and secondary development. - Equipped with the ESP32-C5-WROOM-1 series module, featuring a RISC-V 32-bit processor, up to 240MHz main frequency
- Integrated with 384KB Static RAM, 320KB ROM, 8MB PSRAM, and 32MB Flash, meeting the requirements for program execution, graphical interface, and data storage
- Integrated 2.4GHz and 5GHz dual-band Wi-Fi, Bluetooth 5 (LE), and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communications, with outstanding RF performance
- Onboard Batt recharge management module, with reserved 3.7V MX1.25 Lithium Batt header for connecting external Batt
- Type-C port, improving device compatibility, easier to use
- Onboard 2.8inch LCD display, 240 × 320 resolution, 262K color
- Supports 5-point capacitive touch controlled via I2C interface, with interrupt support
- Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
- Onboard QMI8658 6-axis sensor, RTC sensor, SHTC3 temperature and humidity sensor, TF card slot, etc.
- Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
- Onboard ES8311 audio codec chip, NS4150B power amplifier chip, microphone, and speaker
- Supports ESP-IDF, Arduino, and other development environments, with rich resources for quick and easy development
LCD parameters Display panel IPS Display Size 2.8inch Display Resolution 240 × 320 pixels Display Color 262K communication interface 4-wire SPI Driver IC ST7789 Touch Type Capacitive touch Touch IC CST3530 Active Display Area 57.60 × 43.20 (mm) Function Overview Supports multiple peripherals Supports the expansion of multiple peripherals via GPIO, UART and I2C interfaces, etc. IPS Display Panel 262K color, 240 × 320 resolution, wide viewing angle Supports ESP-IDF, Arduino IDE Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started Application Example What's On Board - ESP32-C5-WROOM-1
- Expansion IO pads
- MX1.25 2PIN speaker header
Audio output signal, for connecting external speaker - ES8311
low-power audio codec chip - NS4150B
audio power amplifier chip - SHTC3 temperature and humidity sensor
provides temperature and humidity measurement for environmental monitoring applications - QMI8658
6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer - Onboard microphone
- PCF85063 RTC chip
- SH1.0 2PIN RTC Batt header
for connecting rechargeable RTC Batt - MX1.25 2PIN Lithium Batt header
for 3.7V Lithium Batt, supports charging and discharging - UART header
- Charging indicator
Lithium battery charge indicator, lights up when charging, off when fully charged (the light status is uncertain when the battery is not connected) - USB Type-C port
- ETA6098 charging management chip
- I2C header
- SH1.0 12PIN connector
- TF card slot
supports TF card up to 64GB - Power ON/OFF chip
- BAT power button
When a Batt is connected, long press 2s to power off, short press 1s to power on - CH32V003 IO expansion chip
- RESET button
- BOOT button
for entering download mode, and can also be reused as a general-purpose button - 2.8inch display panel connector
outline dimensions Package Content Weight: 0.088 kg * the 3.7V Lithium Batt is optional. - ESP32-C5-Touch-LCD-2.8 host x1
- OPTIONAL 3.7V 1000mA MX1.25 2PIN Lithium Batt x1
- SH1.0 12PIN cable ~100mm x1
- SH1.0 4PIN cable ~100mm x2
- 8Ω 2W speaker x1
1 2 3 4 5  |
|
