V6 Volcano Hotend with Titanium Heatbreak and Upgraded Heatsink, 24, 1.75mm
Use as Bowden or Direct feed!
USA Stock with quick shipping from Indiana!For 12 v please see our other listing!
Speed up your 3D printer with this upgraded version of the V6 Volcano Hotend! This kit is outfitted with the latest and best heatsink design that allows you to use it as a bowden or direct feed hotend. No more need for a pneumatic connector, it's built right in. This has the benefit of lowering the weight of the hotened, drastically allowing you to print faster, if you want. And print high temperature plastics with no problems as this heater block is designed for the PT100 thermistor or NTXC 3950 high temp cartridge thermistor, allowing you to exceed the temps where the standard glass bead thermistor dies.Upgraded Heater Block!
This V6 Volcano Hotend includes the V2 Volcano heater block, which is designed to work with the PT100 Thermocouple or a carridge Thermister. Included is the Thermistor Cartridge.
Two Types of Heatbreaks included.Bowden Through Heatbreak!
Our 4.1 Heat Break inserts the Bowden tube all the way down to the top of the Nozzle. This is preferable over the heat breaks that are already lined with a ptfe tube you traditionally see since there is no break in the ptfe tube till it terminates at the nozzle top. Meaning less chance of clogs form miss-matched tube cuts. This configuration works great with standard ABS, PETg and PLA filaments.
Titanium Heatbreak!
Are you looking to print with high temperature or abrasive filaments? Then the Titanium Heat Break is the one you'll want to use! But why Titanium over the steel heat breaks? It's all about the Heat. Steel is a fantastic conductor of heat and when using a steel heatbreak in your hotend the steel conducts a lot of the heat upward into the radiator. This can lead to heat creep into the upper filament path and cause a clog. Also it reduces the efficiency of the heater block requiring the 3D printer to use more power to retain heat down where needed to keep the plastic flow consistent.
Titanium on the other hand is not a good conductor of heat. Heat will still radiate upward with titanium, but heat creep on high temp plastics are less likely and your heater cartridge won't have to work as hard to maintain a consistent temp in the heater block. Our Volcano kit gives you the best of worlds, easy to use bowden configuration and titanium, the best for the more difficult plastics!
24V Heater Cartridge Choice:
Your choice of 24v 40w heater cartridge or superior high quality 24v 50w cartridge. (Make sure you power supply can handle the additional wattage.)
Item shipped from the Midwest so you will get your order fast with FREE same day shipping. On Thingiverse you can find a selection of mounts to fit your specific printer for using e3dhotends. Parts compatible with e3d hotends and extruders.
Hotend Kit IncludesConfig 1 (Metal Parts Only)
1x Aluminum heat sink (radiator)
1x V2 Volcano Aluminum Heater Block.
1x Titanium Heat Break
1x Bowden Thru Heat BreakConfig 2&3 include above and also come standard with:
1x Pneumatic Connector.
1x 30mm 24v Fan With Blue Shroud
1xNTC 3950 1% 100K ohm Thermistor cartridge
1x Bowden tube 1 meter
1x Silicone Sock Insulation (color random black or blue)
5 Brass Nozzles .4, .6, .8, 1.0, 1.2
Config 2
Hotend Kit Plus
24v40w Heater Cartridge
Config 3
Hotend Kit Plus
24v50w Heater CartridgePlease note, once installed a PID tuning will be required to make printer work properly.
Use with your Ultimaker, Flashforge, Creality, Tevo, Ender 3, Lulzbot, Formlabs, RepRap, OpenBuilds, CoreXY D-Bot, C-Bot 3D Printers, Delta / Rostock / Kossel 3D Printers, Railcore
Shipping from Indiana Guarenteed.Payment:We Accept Paypal Only.Shipping:
- We ship to your Paypal address ,please verify your address during checkout.We do not take responsibility for item loss due to wrong address.
- Items are shipped out same day if order is placed before 3:00 PM Eastern Standard Time. Items ordered over the weekend will be mailed out Monday morning.
- Packages, unless otherwise selected, are shipped via USPS First Class Mail and generally arrive at locations in the continental United States in 2-4 business days.
- Lost mail: If via tracking it appears that your package is lost or off track, plase contact us. We will file a lost package claim with USPS. It will take 5 business days to resolve. If truly lost, which happens very seldom we will re-ship at the end of 5 days.
Please Note, due to the hijinks going on in DC with the Postal Service, some packages can get hung up in transit for weeks. They aren't lost, but some trucks are parked and don't get unloaded for days. Please be patient.
About:BriTech 3D is a 3D printer supplier based in the midwest state of Indiana, for quick shipping nationwide. We arenota drop shipper, all product comes to us first, is inspected and then shipped to the customer form our South Bend, IN warehouse, to assure you quality and reliable products. Check competitors listings and reviews! Some claim to be shipping from the States but actually drop ship out of Asia. We ship from Indiana GUARANTEED.
