Condition Notes: These access points are in used physical condition and will show normal signs of indoor use, such as blemishes to the exterior case, fading and other imperfections to the outside casing. All units have been engineer tested and reset to factory default settings to ensure easy adoption into existing deployments. No POE injector is included in this sale. Only what you see pictured.
This is the older version of this model that requires 24v passive poe to be powered. The first generation unifi switches can output this poe with a manual port change through the controller, or you can use a 24v passive poe injector which are very common.PLEASE NOTE THAT NOT POE INJECTOR IS INCLUDED IN THIS SALE!MechanicalDimensionsØ160 x 31.45 mm (Ø6.3 x 1.2")WeightWithout mount: 170 g (6 oz)
With mount: 185 g (6.5 oz)HardwareNetworking interface(1) GbE RJ45 portManagement interfaceEthernetPower methodPoE
Passive PoE, 24V (Pairs 4, 5+; 7, 8 return)Power supplyUniFi PoE switch
24V, 0.5A Gigabit PoE adapter (NOT INCLUDED)
Max. power consumption6.5WMax. TX power
2.4 GHz
5 GHz
6 GHz
20 dBm
20 dBm
–MIMO
2.4 GHz
5 GHz
6 GHz
2 x 2
2 x 2
–Throughput rate
2.4 GHz
5 GHz
6 GHz
300 Mbps
867 Mbps
–Antenna gain
2.4 GHz
5 GHz
6 GHz
3 dBi
3 dBi
–ButtonFactory resetMountingWall, ceiling (Included)Ambient operating temperature-10 to 70° C (14 to 158° F)Ambient operating humidity5 to 95% noncondensingCertificationsCE, FCC, ICSoftwareWiFi standards802.11 a/b/g/n/r/k/v/acWireless securityWEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)BSSIDUp to 8 per radioVLAN802.1QAdvanced QoSPer-user rate limitingGuest traffic isolationSupportedPower saveSupportedWMMVoice, video, best effort, and backgroundConcurrent clients250+Supported Data Rates (Mbps)802.11a6, 9, 12, 18, 24, 36, 48, 54 Mbps802.11b1, 2, 5.5, 11 Mbps802.11g6, 9, 12, 18, 24, 36, 48, 54 Mbps802.11n6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)802.11ac6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80)
