Excellent condition TYAN Tiger MP motherboard, ATX Format.
A Back panel I/O Shield is included with manual on disk.
Triple cartons for safe delivery. Fast ship.YOU MUST have matched Athlon MP processors. Please
take note : NOT XP, but MP processors.
Note: The Tiger MP S2460 accepts a standard ATX-stylepower supply. However, the P/S must be able to supply a minimum of 30A on the 5-volt line. Many 300+ watt power supplies on the market today are capable of this output.Processor Support :• Dual PGA 462 "ZIF" processors• Supports up to 2 AMD Athlon MP processors• Two onboard VRMs• Front-Side Bus support for 266/200MHz
Chipset• AMD-760 MP chipset• AMD-762 north bridge & AMD-766 south bridge• Winbond W83627HF Super I/O ASIC
Memory• Four 184-pin 2.5-Volt DDR DIMM sockets• Supports up to 4GB * of Registered DDR 200/266• Supports ECC (72-bit) memory modules
Expansion Slots• One AGP slot supports 4x/2x AGP modes• Four 64-bit 33MHz (5-volt) PCI slots• Two 32-bit 33MHz (5-volt) PCI slots• Total of seven usable slots
Integrated I/O• One floppy connector supports up to two drives• Two 9-pin 16550-based serial ports• One 25-pin SPP/ECP/EPP parallel header• Four USB ports (two stacked rear connectors and two front panel headers)• PS/2 keyboard and mouse ports
* Note: The AMD-760 MPX requires a portion of memory to be reserved for PCI devices. Allocation for these devices is dependent on the number of PCI devices installed, and option ROM for each device. Common configurations will see 3.5GB to 3.8GB of available memory.
Integrated PCI IDE• Dual-channel master mode• Supports up to four enhanced IDE devices• Support for DMA100/66/33 IDE and ATAPI compliant devices
System Management• 3-pin fan monitoring headers• 3-pin Wake On LAN header (optional)• Winbond W83782D hardware monitoring ASIC• System Monitoring Software
BIOS• Phoenix BIOS 4Mbit Flash ROM• User settings for hardware monitoring (option)• Auto-configuration of IDE hard drive types• Multiple boot options• DMI 2.0 compliant
Form Factor• ATX footprint (12" x 10.3", 304.8 x 261.62mm)• 20-pin power connector (300+W, +5V must be 30A+)• Stacked parallel (one) and serial (two) ports• Stacked USB (two) ports• Stacked keyboard and mouse ports
