Tyan S2881G2NR Dual AMD CPU Hi-Performance Thunder K8SR Server Motherboard
Description :
You are offerding ona New Pull from System
Tyan S2881G2NR Dual AMD CPU Hi-Performance Thunder K8SR Server Motherboard
Benefits and ApplicatiosUtilizing two AMD Opteron™ processors, the Thunder K8SR (S2881) is the best choice for 1U/2U rackmount servers. The Thunder K8SR (S2881) offers competitive features such as eight DIMM slots for up to 16GB of Registered DDR400 memory, two independent PCI-X buses, onboard ATI® RAGE™ XL graphics, and Serial ATA with RAID support. With strategically located components, the Thunder K8SR (S2881) allows maximum airflow across the motherboard for ideal temperature inside the chassis.Specifications
Processor
• Dual µPGA 940-pin ZIF sockets
• Supports up to two AMD Opteron™ processors
• 128-bit DDR dual-channel memory controller
• (integrated in CPU)
• Supports Single and Dual Core processors Chipset
• AMD-8131™ HyperTransport™ PCI-X Tunnel
• AMD-8111™ HyperTransport™ I/O Hub
• Winbond™ W83627HF Super I/O ASIC
• Analog Devices ADT7463 Hardware Monitoring ICMemory
• 128-bit DDR memory bus
• Eight 184-pin 2.5-Volt DDR DIMM sockets
• Supports up to 32GB of Registered DDR
• Supports ECC type memory modules
• Supports DDR 266/333/400
• Supports Single/Dual/Quad Rank mem. modules
• Supported with Opteron 246 CPU’s or higherExpansion Slots
• Two independent 64-bit PCI-X buses
• One 100/66/33 MHz (3.3-volt) PCI-X slots
- from PCI-X bridge A
• One 133/100/66/33 MHz (3.3-volt) PCI-X slot
• Total of two usable slotsIntegrated I/O
• One floppy connector support up to two drives
• Two 9-pin serial ports
- one connector and one header
• One 25-pin SPP/ECP/EPP parallel header
• Four USB 1.1 ports (two rear and two header)
• One 15-pin VGA connector
• PS/2 mouse and keyboard connectorsSystem Management
• Total of nine 3-pin fan headers
• Six fan headers with monitoring
• One 2-pin Chassis Intrusion header
• Temperature, voltage and fan monitoring
• Port 80h LED 7-segment displayIntegrated Enhanced IDE Controller
• Two IDE dual-drive ports for up to four
EIDE devices
• Supports for UDMA 133/100/66/33 IDE drives
and ATAPI devicesIntegrated LAN Controller
• Broadcom BCM5704C dual-channel GbE LAN
- Two RJ-45 LAN connectors with LEDs
- Connected to PCI-X Bridge A
• Two Front Panel LED headers
Integrated PCI Graphics
• ATI® RAGE™ XL 8MB PCI graphics controllerIntegrated SATA Controller
• Silicon Image Sil 3114 SATA controller
• Supports four-ch, SATA RAID (RAID 0, 1, 0+1)
• Total of four 7-pin SATA 1.0 connectors
• Supports up to four Serial ATA150 drivesIntegrated SCSI Controller (option)
• Adaptec 7902 U320 SCSI controller
• Two U320 68-pin SCSI connectors
• Connects to PCI-X Bridge A
• Adaptec ZCR support through low-profile
SO-DIMM Card Intelligent Platform Management Interface Header
• TYAN Server Management Daughter card
(optional) supports features listed below via
IPMI header (SMDC/TSO Support)
• QLogic™ Zircon Baseboard Management
Controller (BMC) based on powerful ARM7
technology
• Tailored for IPMI highest 1.5 Spec.
• Supports KCS and BT styles
• Flexible Windows or Linux Management Solution
• Supports RMCP and SNMP protocols
• Supports ASF standard and EMP
• I2C serial multi-master controllers and UARTs
• Build-in IPMB connector
• Remote power on/off and reset support
(IPMI-over-LAN)BIOS
• AMI® BIOS 8.0 on 4Mbit LPC Flash ROM
• Supports ACPI 2.0 and SRAT
• Supports PXE via Ethernet, USB device boot
• SMBIOS 2.3.1, BBS 1.1 compliant
• Headless Operation via serial console redirect
and remote flash
• 48-bit LBA SupportForm Factor
• SSI EEB v3.0 footprint (12"x13"; 304.8x330.2mm)
- fits many Rackmount chassis
• EPS12V/SSI (24pin + 8pin) power connectors
• Serial (one) and VGA (one) connectors
• Stacked USB 1.1 (two) connectors
• Stacked PS/2 keyboard and mouse connectors
• Two RJ-45 LAN connectors with LEDsRegulatory
• FCC Class B (DoC)
• European Community CE (DoC).
Shipping :
Delivery time normally takes 2-7 business days in the USA depending what carrier you choose. International shipment will take upto 14 working days or longer. For international customer we do not cover any custom fees. It's your responsibilities for any fees associated with your purchase. We keep all the serial #s inhouse for verify returns. PLEASE READ CAREFULLY, DO NOT offer IF YOU DON'T AGREE WITH OUR TERMS! THANK YOU VERY MUCH!
Payment :
We accept PayPal. PayPal is preferred. Please pay within 3 days of sale closed. We ship to PayPal confirmed address only or your payment may have refunded. All sales are final. For Shipment and tracking # will be send within 24 hours of payment received. Thanks!
Click to EnlargeClick to EnlargeClick to EnlargeClick to EnlargeClick to Enlarge
inkfrog terapeak
