TWO Pcs Rosewill RC-200 (PI20680-2X3B) Ultra ATA-133 2-Port PCI IDE Storage Adapter with RAID Support Card. With each card the drivers CD, low profile bracket and ATA cables set are included.
This card uses PCI-IDE Silicon Image (Sil0680 chipset) as the IDE/RAID (0/1/0+1/JBOD) Host Controller.
If it is required to add additional IDE/ATA hard drives to your old computer system but you don't have any IDE/ATA ports left? This Rosewill RC-200 controller card can provide the extra ports you need. With 2 internal Ultra ATA/133 ports, the Rosewill RC-200 will enhance any system storage capabilityand provide loads of expansion. The RC-200 is compliant with UltraDMA6 ATA/133 specifications so it will work on almost any IDE device.
To add to more storage expansion capabilities, the RC-200 can also support RAID in the following modes: RAID0(striping), RAID1(mirroring), RAID 0+1(mirroring+striping). Also keep in mind that you can also choose alternatively to have just 2 hard drives without RAID. Last but not least the RC-200 includes drivers for most Windows operating systems including Windows 98SE/ ME/ NT 4.0/2000/XP/Server Image Sil0680 ATA/133 IDE/RAID controller chip32-bit PCI InterfaceSupports bus master DMA at 133 Mbytes/sec PCI burst rateSupports Max. IDE/ATA data transfer rate of 133 MB/secTwo Ultra ATA Channels with 128 Bytes buffer per ChannelSupports up to four IDE/ATA DevicesSupports RAID 0, RAID 1, RAID0+1 modesFully backwards compatible with Ultra ATA/100, ATA/66,Ultra ATA/33, EIDE/Fast ATA-2, IDE and ATAPI devicesCompliant with PCI Specification, Rev. 2.2Ultra ATA/133 Compatible specificationsPCI Plug & Play compliant