SupermicroSYS-7047R-72RFBarebones Tower Server NEW IN BOX, IN STOCK
Product SKUsSYS-7047R-72RF
- SuperServer 7047R-72RF (Black)
Motherboard
Super X9DRH-7FProcessor/CacheCPU
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
andE5-2600 v2family†
Note† BIOS version 3.0 or above is requiredCache
System Bus
System MemoryMemory Capacity
- 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
- Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
On-Board DevicesChipset
SATA
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
SAS
- SAS2 from Broadcom 2208
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
Network Controllers
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
Video
- G200 (Nuvoton WPCM450 BMC with graphic controller)
Super I/O
Input / OutputSATA
- 2x SATA 3.0 ports (6Gbps)
- 8x SATA 2.0 ports (3Gbps)
SAS
LAN
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB
- 2x Front USB 2.0 + 4x Rear USB 2.0 ports
- MB: 4x rear + 2x via header + 1x Type A
Video
Serial Port / Header
Expansion SlotsPCI-Express
- 1 PCI-E 3.0 x16 slot
- 6 PCI-E 3.0 x8 slots
System BIOSBIOS Type
- 64Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
- Plug and Play (PnP)
- APM 1.2
- DMI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
ChassisForm Factor
- 4U Rackmountable / Tower
- Optional Rackmount Kit
Model
Width
Depth
Gross Weight
Available Colors
Front PanelButtons
- Power On/Off button
- System Reset button
LEDs
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Information LED
- Power Fail LED
Ports
Drive BaysHot-swap
- 8x 3.5" Hot-swap SAS2/SATA Drive Trays
Peripheral Bay(s) [90oRotatable]
- 2x 5.25" Peripheral Drive Bays
- 1x 5.25" Bay that fits 3.5" bay devices
SAS / SATA BackplaneSAS / SATA Hard Drive Backplane w/AMI MG9072System CoolingFans
- 3x 5000 RPM Hot-swap PWM Cooling Fans
- 2x 5000 RPM Hot-swap Rear Exhaust PWM Fans
Power Supply with Power Distributor920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2CAC Input
- 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output
- 4 Amp @ +5V standby
- 75 Amp @ +12V
Certification Platinum Certified
[Test Report]PC Health MonitoringCPU
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
FAN
- Total of eight fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
LED
- System Information LED
- Suspend static indicator LED
- UID/Remote LED
Other Features
- Chassis intrusion detection
- Chassis intrusion header
Operating Environment / ComplianceRoHS
Environmental Spec.
- Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
Parts List - (Items Included)Part NumberQtyDescriptionMotherboard / X9DRH-7F Motherboard
4U ChassisBackplaneCSE-SAS-743TQ1743 SAS BACKPLANE W/AMI MG9072Heatsink / RetentionSNK-P0048PS22U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MBCableCBL-0118L-032Ipass to 4 SATA cable 23CM, W / 25.5cm SB, S, 30AWGVector Data builds rugged, carrier-grade and custom systems.
We use to sell our OEM surplus.
We do accept purchase orders. Please first purchase the item on and then send us a message stating that you would like to pay with a purchase order and we will send instructions.
On-site installation is available for an additional fee.
Please contact us to have a custom product listing created for you if you require a custom configuration or need a part that is not listed.
![Buy Now Buy Now](buy.gif)