Supermicro SYS-2029BT-HNC0R Barebones Server X11DPT-B NEW IN STOCK 5 Yr Wty
SpecificationsProduct SKUsSYS-2029BT-HNC0R

• SuperServer 2029BT-HNC0R (Black)

Motherboard
Super X11DPT-BProcessor (per Node)CPU

• Dual Socket P (LGA 3647)
• 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,
  Dual UPI up to 10.4GT/s
• Support CPU TDP 70-205W*

Cores

• Up to 28 Cores

Note* 200W/205W CPUs are supported under certain configurations. Please contact Supermicro Technical Support for additional information about specialized system optimization
Note‡BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R).

Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.System Memory (per Node)Memory Capacity

• 24 DIMM slots
• Up to 6TB 3DS ECC DDR4-2933MHz†RDIMM/LRDIMM
• Supports Intel® Optane™ DCPMM††

Memory Type

• 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM

Note†2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
††Cascade Lake only. Contact your Supermicro sales rep for more info.On-Board DevicesChipset

• Intel® C621 chipset

SAS

• SAS3 (12Gbps) via Broadcom 3008; IT mode

Network

• Must bundle with at least oneSIOMnetwork card

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Video

• ASPEED AST2500 BMC

Input / Output (per Node)LAN

• 1 RJ45 Dedicated IPMI LAN port

USB

• 2 USB 3.0 ports (rear)

Video

• 1 VGA port

DOM

• 1 SuperDOM(Disk on Module) port

Others

• M.2 and SATA DOM for boot drive only

System BIOSBIOS Type

• AMI 32Mb SPI Flash ROM

ManagementSoftware

• Intel® Node Manager
• IPMI 2.0
• KVM with dedicated LAN
• SSM,SPM,SUM
• SuperDoctor® 5
• Watch Dog

Power Configurations

• ACPI / APM Power Management

PC Health MonitoringCPU

• Monitors for CPU Cores, Chipset Voltages, Memory.
• 4+1 Phase-switching voltage regulator

FAN

• Fans with tachometer monitoring
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors

Temperature

• Monitoring for CPU and chassis environment
• Thermal Control for fan connectors

ChassisForm Factor

• 2U Rackmount

Model

• 17.6" (447mm)

Height

• 3.47" (88mm)

Depth

• 28.75" (730mm)

Package

• 24.65" (H) x 9.76" (W) x 45.28" (D)

Weight

• Gross Weight: 85 lbs (38.6kg)
• Net Weight: 54.5 lbs (24.7 kg)

Available Colors

• Black

Front PanelButtons

• Power On/Off button
• UID button

LEDs

• Power status LED
• HDD activity LED
• Network activity LEDs
• Universal Information (UID) LED

Expansion Slots (per Node)PCI-Express

• 2 PCI-E 3.0 (x16) Low-profile slots
• 1SIOMcard support
  (must bundle with network card)

Drive Bays / Storage (per Node)Hot-swap

• 6 Hot-swap 2.5" SAS3 drive bays or
  4 NVMe + 2 SAS3 Hot-swap 2.5"
  
  Please contact Supermicro Technical Support for additional information about HDD and SSD if mixed. Some restrictions and configuration rules that apply to SSD are different from HDD.

M.2

• 2 M.2 NVMe or SATA (2240/2260/2280) via optional AOC-SMG3-2H8M2-B

System CoolingFans

• 4 Heavy duty 8cm PWM fans with air shroud

Power Supply2200W Redundant Power Supplies with PMBusTotal Output Power

• (W x H x L)
  • 45 x 40 x 480 mm
  Input
  • 1200W: 100-127Vac / 50-60Hz
  • 1800W: 200-220Vac / 50-60Hz
  • 1980W: 220-230Vac / 50-60Hz
  • 2090W: 230-240Vac / 50-60Hz
  • 2090W: 180-220Vac (for UL/cUL only)
  • 2200W: 220-240Vac (for UL/cUL only)
  • 2090W: 230-240Vdc (for CCC only)
  +12V
  • Max: 100A / Min: 0A (100-127Vac)
  • Max: 150A / Min: 0A (200-220Vac)
  • Max: 165A / Min: 0A (220-230Vac)
  • Max: 174.17A / Min: 0A (230-240Vac)
  • Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only)
  • Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only)
  • Max: 174.17A / Min: 0A (230-240Vdc, CCC only)
  12Vsb
  • Max: 2.1A / Min: 0A
  Output Type
  • Gold Finger
  Certification Titanium Level
  [Test Report]Operating EnvironmentRoHS
  • RoHS Compliant
  Environmental Spec.
  • Operating Temperature:
    10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
    -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
  
  Parts ListParts List - (Items Included)
  Part Number
  Qty
  Description
  Motherboard / ChassisMBD-X11DPT-B
  CSE-217BHQ+-R2K22BP24
  1Super X11DPT-B Motherboard
  2U Twin 1U hybrid ADP supporting 6x SAS3 and 4x NVMeBackplaneBPN-SAS3-217BHQ-N412U 4-Node 24-Port Backplane Supports 2x2.5\" SATA3/SAS3 SSD/HDD and 4x2.5\" SATA3/SAS3/NVMe Storage Media per NodeCable 1CBL-PWCD-05782PWCD,US,IEC60320 C14 TO C13,3FT,14AWGDrive Tray(s)MCP-220-00141-0B-BULK8Black Gen3 hot-swap 2.5 inch HDD tray with lock improved EMIDrive Tray(s)MCP-220-00144-0B-BULK16Black Gen3 hot-swap 2.5 inch HDD tray with lock, orange tabPartsMCP-240-21730-0N1217B BigTwin type I (Impact) BPN retention bkt w/ foam assyAir ShroudMCP-310-21718-0B4Bigtwin air box for X11DPT-B(4pcs/set)Air ShroudMCP-310-21724-0B4Bigtwin 2U4N plastic air shroud (2pcs) for Cascade lake MBManualMNL-1948-QRG12029BT-H(N/T/NC0)R Quick Reference GuideRiser CardRSC-P-64RSC-P-6 (1U LHS TwinPro RSC with 1 PCI-Ex16),RoHSRiser CardRSC-R1UTP-E16R41U RHS TwinPro Riser card with one PCI-E x16 slotHeatsink / RetentionSNK-P0067PS41U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention MechanismHeatsink / RetentionSNK-P0067PSM41U Passive CPU Heat Sink with a 26-mm Wide Middle Air Channel for X11 Purley Platform Equipped with a Narrow Retention MechanismFanFAN-0183L4480x80x38 mm, 16.5K RPM, Non-hot-swappable Middle Cooling FanPower SupplyPWS-2K22A-1R21U 2200W Redundant Power Supply Titanium, 45(W) X 40(H) X 48
  Vector Data builds rugged, carrier-grade and custom systems.
  We use to sell our OEM surplus.
  We do accept purchase orders. Please first purchase the item on and then send us a message stating that you would like to pay with a purchase order and we will send instructions.
  On-site installation is available for an additional fee.
  Please contact us to have a custom product listing created for you if you require a custom configuration or need a part that is not listed.