Supermicro CSE-815 X10SLM+-LN4F CTO E3-1200 v3/v4 4x DIMM 4x 3.5" Bay 1U Server
Backplane P/N: SAS815TQ
Motherboard P/N:X10SLM+-LN4F rev 1.01
In Good Condition, Full Working Order
Tested
CTO Configure-To-Order
No Processor, No Memory, No Hard Drives Included
Supermicro CSE-815 1U 4 x 3.5” Chassis
4 x 3.5" Hard Drive SAS Bays With Hot Plug Caddies
X10SLM+-LN4FMotherboard rev 1.01
1 x Heatsink
1 x RSC-RR1U-E16 Riser Card
1 x Fixed 340W Power Supply
Manufacturers Motherboard Specification:
MBD-X10SLM+-LN4F
- 9.6" x 9.6" (24.38cm x 24.38cm)
Processor/CacheCPU
- Intel® 4th Generation Core i3 series, Intel® Celeron®, Intel® Pentium®v, Intel® Xeon® processor E3-1200 v3, Intel® Xeon® Processor E3-1200 v4 series.
- Single Socket LGA 1150 supported, CPU TDP support 85W
System MemoryMemory Capacity
- Up to 32GB Unbuffered ECC UDIMM, DDR3-1600MHz, in 4 DIMM slots
Memory Type
- 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
Memory Voltage
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
On-Board DevicesChipset
SATA
- SATA3 (6 Gbps) ports; RAID 0,1,5,10
- SATA2 (3 Gbps) ports; RAID 0,1
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Controllers
- Quad LAN with Intel® Ethernet Controller I210-ATSupports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 outputRealtek RTL8211E PHY (dedicated IPMI)
Graphics
Input / OutputLAN
- 4 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
USB
- 6 USB 2.0 ports (2 rear + 4 headers)
- 4 USB 3.0 ports (2 rear + 1 header + 1 Type A)
Video Output
- 1 VGA D-Sub Connector port
Serial Port / Header
- 2 COM Ports (1 rear, 1 header)
1 fast UART 16550 serial
TPM
CS224726 224730 224746 224749 224750 223945 223946 224821 224824 224791 224792 224793 224795224728224729 224747 224748dup dup .co.ukExpansion SlotsPCI-E
- 1 PCI-E 3.0 x16
- 1 PCI-E 2.0 x2 (in x8 slot)
System BIOSBIOS Type
- 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
- ACPI 5.0
- USB Keyboard support
- DMI (SMBIOS) 2.7
ManagementSoftware
- IPMI2.0, NMI, SuperDoctor® III, Watchdog
Power Configurations
- ACPI Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
PC Health MonitoringVoltage
- +12V, +3.3V, +5V, +5V standby, 5 Phase-switching voltage regulator, Chipset Voltage, HT, VBAT
FAN
- 5x 4-pin fan headers (up to 5 fans), Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control
Temperature
- Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI, FC temperature sensing logic
LED
- CPU / System Overheat LED, +5V Standby alert LED
Other Features
- Chassis intrusion detection, Chassis intrusion header
Operating EnvironmentOperating Temperature Range
- 0°C ~ 50°C (32°F ~ 122°F)
Non-Operating Temperature Range
- -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
- 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
- 5% - 95% (non-condensing)
![Buy Now Buy Now](buy.gif)