Acer (SuperMicro) server dual socket 1366 mainboard MB.R510F.001 X8DTU-LN4F+-AI034
M/b is brand new. OEM packaging. Sealed. Never used or opened. No accessories (cables, CD's, backplate) are included. Just the board itself.
Genuine Acer/Gateway part.
30 days warranty back-to-base.
Key Features
1. Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s2. Intel® 5520 (Tylersburg) Chipset3. Up to 288GB DDR3 1333/ 1066/
800MHz ECC Registered DIMM /
48GB Unbuffered DIMM4. 2 x Intel® 82576 Dual-Port Gigabit
Ethernet Controllers (4 ports)5. 6x SATA2 (3 Gbps) Ports via
ICH10R Controller6. Left Side
1 (x16) PCI-E 2.0 + 1 PCI-E 2.0 x4
by riser card
Right Side
1 (x8) PCI-E 2.0 + 1 PCI-E 2.0 x4
by riser card (in x16 slot)
For 2U configuration, Please go to
UIO Riser Cardspage7. Integrated Matrox G200eW Graphics8. Integrated IPMI 2.0 with Dedicated LANProduct SKUs- Discontinued SKU (EOL). Please contact sales-rep for alternative options.MBD-X8DTU-LN4F+ -B
Physical StatsForm Factor
- 12.8" x 16.5" (32.5cm x 41.9cm)
Processor/CacheCPU
- Dual 1366-pin LGA Sockets
- Supports up to twoIntel® 64-bit Xeon®processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere) - Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
QPI
System MemoryMemory Capacity
- 18x 240-pin DIMM slots
- Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
Memory Type
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
- 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
Note:This board does not support LRDIMM memory.On-Board DevicesChipset
- Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
SATA
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
Network Controllers
- 2x Intel® 82576 Dual-Port Gigabit Ethernet Controllers (4 ports)
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3support for fast, scaleable, and reliable networking
- VMDqsupport for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
Super I/O
Input / OutputSerial ATA
- Six Serial ATA ports
- Six SATA hard drives supported
LAN
- 4x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB
- 2x USB rear ports
- 1x USB on-board
- 5x USB internal headers
- Total 8 USB 2.0 Compliant
VGA
Keyboard / Mouse
- PS/2 keyboard and mouse ports
Serial Port / Header
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
Chassis ( Optimized for X8DTU-LN4F+ )Important Chassis Notes
- To support the new generation Intel® Xeon® processor-based motherboards, aRevision Kchassis is recommended for most models. Please talk to your sales representative or follow the link for details.
Expansion SlotsPCI-Express / PCI-X / UIO
Left Side- 1 (x16) PCI-E 2.0 + 1 PCI-E 2.0 x4 by riser card
Right Side- 1 (x8) PCI-E 2.0 + 1 PCI-E 2.0 x4 by riser card
- For 2U configuration, Please go toUIO Riser Cardspage
System BIOSBIOS Type
- 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
ManagementSoftware
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
Power Configurations
- ACPI / ACPM Power Management
PC Health MonitoringVoltage
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
FAN
- Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
Temperature
- Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
Other Features
- Chassis intrusion detection
- Chassis intrusion header
Operating EnvironmentEnvironmental Spec.
- Operating Temperature: 10° to 35° C (50° to 95°F)
- Non-operating Temperature: -40° to 70° C (-40° to 158° F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
OS Compatibility
• Please see ourOS Compatibility Chart