Seagate NetApp 108-00221+B0 ST600MM0006 600GB 10K SAS 6Gb/s 2.5" HDD Drive
Refurbished | Free Shipping | Allstate-Serviced Warranty | Money Back Guarantee
Fully Tested | SAS 6Gb/s | 2.5-Inch | 600GB | 10K RPM | NetApp P/N: 108-00221+B0 | Model: ST600MM0006
Designed for supported NetApp storage systems and other enterprise environments that accept 2.5" SAS hard drives.
Avoid compatibility mistakes and downtime. This exact Seagate NetApp 2.5" SAS enterprise hard drive is sold as Refurbished, professionally tested, and identified by the correct NetApp part number 108-00221+B0 and Seagate model ST600MM0006—so you can validate fitment before deployment and order with confidence.
Built for business and datacenter environments, this 600GB 10K SAS drive is a practical choice for storage replacements, hot spares, maintenance stock, and enterprise inventory where matching interface, speed, form factor, and part number matters.
Testing / Functional Status (Fully Tested)
This drive is fully tested and verified for proper operation prior to shipment. Our goal is simple: deliver a reliable enterprise hard drive that’s ready for installation and backed by the protections associated with the Refurbished program.
Typical validation includes:
Power-on / initialization verification
Health check and functional read/write verification
Interface detection and stability confirmation
Interface, Compatibility & Downtime Risk (Read This)
Interface: SAS 6Gb/s (Serial Attached SCSI)
Form Factor: 2.5-inch enterprise drive
Drive Model: ST600MM0006
Important: This is SAS, not SATA. A SATA-only backplane or controller will not accept a SAS drive.
For storage installs, confirm controller, shelf, firmware, and carrier requirements before ordering. Enterprise array environments often require matching OEM part numbers and supported drive profiles for proper recognition.
If you’re replacing an existing drive, matching the NetApp P/N 108-00221+B0 and Seagate model ST600MM0006 helps reduce ordering errors and minimizes deployment risk.
Specifications
Brand: Seagate / NetApp
Model: ST600MM0006
NetApp Part Number: 108-00221+B0
Capacity: 600GB
Form Factor: 2.5"
Interface: SAS 6Gb/s
Speed: 10,000 RPM
Drive Type: Enterprise Hard Disk Drive (HDD)
Use Case: NetApp storage systems, hot spares, enterprise storage with systems that support 2.5" SAS 6Gb/s hard drives, including supported NetApp storage configurations and other enterprise SAS platforms where the correct drive identifiers are required. Please verify:
SAS controller/backplane support (SAS required)
6Gb/s SAS compatibility for your storage platform
Carrier / tray requirements for your specific system
Any firmware or storage-array compatibility requirements for your environment
Why Buy Refurbished
This item is offered through the Refurbished program from a quality-vetted seller. Refurbished listings include free shipping, an Allstate-serviced warranty, and Money Back Guarantee coverage.
Warranty Note (Important)
If your listing is in the Certified Refurbished tier, the included Allstate-serviced warranty is two years.
If it is listed under Excellent / Very Good / Good, the included warranty is one year.
Use the warranty length that matches your specific refurb tier.
What’s Included
Seagate NetApp 600GB 10K 2.5" SAS 6Gb/s HDD (108-00221+B0 / ST600MM0006)
Only the item shown in the photos is included unless otherwise stated. For storage parts, please review photos to confirm whether any tray, caddy, or carrier is included.
Buy with confidence from an Refurbished seller offering free shipping, tested enterprise hardware, and verified NetApp/Seagate part-number identification—a dependable replacement option for supported enterprise SAS storage environments.
