SFR1M44-FU-DL 3.5" USB 1.44MB Floppy Drive Emulator for Embroidery Machine For Sale
|
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
SFR1M44-FU-DL 3.5" USB 1.44MB Floppy Drive Emulator for Embroidery Machine Features: - Use normal USB flash drive as the medium for transfer design.
- 34pin floppy driver interface, 5V DC power supply, easy to install.
- 1.44MB built-in flash memory, with FAT12 format, used for cache data from USB flash drive.
- 1.44MB capacity of files in root directory or 999 folders can be searched.
- Long file name and 4-level directory in 999 folders supported.
- Jumpers with function for different machines.
- 100 disk image file supported. (used for machine with non FAT disk format, example for make boot disk).
Floppy Driver: Interface: 34pin floppy driver interface, 5V DC power supply port Format of disk: 1.44MB 2HD Cylinders: 80 Tracks: 160 Sectors/Track: 18 Bytes/Sector: 512 Data Transfer rate: 500 kbps Encoding method: MFM Panel: 8 segment numbers: Represent partitions number Green LED: Status of read and write operation USB port: Connect USB flash drive Button: When no USB flash drive plugged on emulator: Left button used to rise ten-digit, right button used to rise single-digit, press 2 button together to rise hundred-digit, when the hundred-digit is 'b', the image mode used. When an USB flash drive plugged on emulator: Left button used to transfer data from built-in memory into USB flash drive, right button used to transfer data from USB flash drive into built-in memory. Firmware version of emulator: Keep pressed 2 button together, power on, 8 segment numbers will display firmware version and data of emulator to detect different model. Error Code: E0: No specified file in USB flash drive E16: Built-in memory fault Jumper Setting: J5: --- JA: Set to generate READY signal on 34pin of floppy driver interface JC: --- JB: --- S0: Driver select 0 S1: Driver select 1 MO: MotorSpecifications: Model: SFR1M44-FU-DL Compatibility: Suitable for embroidery machine with 1.44MB floppy drive Voltage: 5V DC Interface: USB port, 4 pin power plug, 34 pin plug Housing material: ABS Size (L x W x H): Approx. 122 x 102 x 25mm / 4.8 x 4.0 x 1.0inch Color: Gray (Shown as the picture) Package weight: 98gPackage Included: 1 x USB Emulator 2 x Jumper Cap 4 x Screws ![Buy Now Buy Now](buy.gif)
|
|
|
|