Product Description
Size:Round Dia 309mmX309mm
Applicable toFlsun V400
Package list: 1 PC Double Side PEO+PEI Steel Sheet Build Plate(With or Without magnetic base)
Recommended printing temperature:PLA 60℃ PETG 70℃
1. When printing PLA filaments, the bottom (first layer) is relatively smooth. When the temperature is higher than 60°C, the viscosity is stronger; when the temperature is lower than 60°C, the viscosity is weak, and the printed parts are easy to fall off and cannot be printed.
2. When printing PETG filaments, the bottom (first layer) is relatively smooth. When it is higher than 60°C, it has a certain degree of stickiness and is easy to fall off; when it is higher than 65°C, the stickiness is stronger; when it is lower than 60°C, the stickiness is weaker Weak, the prints fall off easily and cannot be printed.
Product Advantage
1. Both sides can be printed, and one heating bed can obtain the experience of using two materials
2. PEO has pattern, more novel
3. PEI is durable and scratch-resistant
4. The viscosity of PEO surface is better than that of PET
Note
1. The PEO surface is not as durable as PEI, and the surface pattern may disappear after a long time
2. As the temperature of the hot bed rises, the magnetism of the magnetic sticker may weaken
How to use the product
1. Put it on the magnetic sticker and absorb the steel plate magnetically
2. Recommended printing material for PEO surface: PLA/PETG. The stickiness of ABS is not as strong, but compared to the PET surface, ABS sticks better.
3. For the PEI side, it is recommended to print materials such as PLA/PETG. If printing ABS, it is recommended to seal and print.