USB interface Rockville RockMix 6FX is the perfect compact solution for recording, streaming, live performances, gyms, restaurants, podcasting, karaoke and more. This mixer is packed with all of the important features that you need.The built in effects engine on this mixer has 16 amazing sounding effects, ranging from reverbs / delays, lush choruses to voice canceler. We use a high-resolution 24 bit DSP effects processor, which makes them sound so crisp. These sound better than most external FX processors and are easier to integrate into your setup.
The built-in USB interface allows you to record the master output of all the channels to the recording software on your computer. The USB interface will also allow you to easily play back songs or other audio from your computer or laptop to either the main mix or the headphones output of the mixer.
The USB interface is also perfect for podcasting. It is the bridge to get your computer audio to your speakers or to get your audio output to your computer for recording or live streaming.
Our low-noise mic pre-amps are clean, with a lot of headroom, ensuring a clear sound. Mic pre-amps are one of the most important parts of a mixer. A good quality pre-amp such as this one makes a world of a difference in the sound.
The 2-band EQ and panning allows you to customize the sound the way you want it. We added pro Bluetooth connectivity, so you can have wireless playback whether you're in a gym, restaurant, home, or any other place where you do not want to hard-wire your playback device. The Bluetooth is also a great way to have guests call to your podcast show.
Channels 1 and 2 have XLR and ¼” combo jack inputs. Then you get 2 stereo channels that can accept a variety of sources ranging from microphones to any mono/stereo instruments. Channels 1 and 2 have 48V phantom power for use with condenser mics.
Channels 3 and 4 are great because you have the option to route the effects to these channels.
Channels 5 and 6 can accept a variety of sources ranging from microphones to any mono/stereo instruments.
The clipping indicators on CH1 and 2 will prevent you from adding too much gain, making it easy to set your levels accurately.
This solid steel mixer is built like a Rock! Every component, including all potentiometers and knobs are extremely high grade.
If you are using this for Karaoke you will love our vocal canceller function that will remove the vocals so you can sing along to the music!
Features:
- Rockville RockMix 6FX 6 Channel Mixer with USB Recording Interface, Effects and Bluetooth
- Channels 1 and 2 have XLR / ¼” Mic/Line input combo jacks with gain and volume control, 2-band EQ, pan, 48V phantom power, pad, FX
- Ch 2 has an Hi-Z impedance switch which allows you to easily integrate instruments such as electric/acoustic guitar, bass or synth into your setup
- (CH3-4) ¼” jack Line input with volume control, gain-switch and FX
- (CH5-6) ¼” jack Line input with gain-switch and volume control
- USB audio interface can be assigned to Main Mix output or headset output
- XLR Main mix balanced L/R output
- ¼” Main mixed unbalanced L/R output
- ¼” Headset output
- 24 Bit FX engine with 16 DSP Effects (Each effect sounds great)
- Built in professional Bluetooth wireless audio streaming
- Main mix master volume knob
- Built in USB interface will send the Main Mix to your favorite DAW
- Interface will be identified and addressed as an external sound card in your DAW
- Peak LED indicator detects clipping on channel (CH1-2)
- Main mix has left and right LED volume meters and clip indicators
- Power on LED indicator
- Our design is Simple, flexible, and highly-efficient
- Super linear mic preamp with low noise (this uses a top of the line mic pre normally found in very expensive mixers)
- This mixer is built out of solid steel metal and when you pick it up you immediately can feel the weight and how solid it is
- All knobs and potentiometers are super sturdy and linear
- 48V phantom power for condenser microphones on CH1 and 2
- BUS powered allows you to power the mixer by plugging it into the USB port of your computer or laptop
- Mixer includes a power adapter so you can power the mixer either through the wall or USB
- British EQ circuitry is designed to emulate the classic EQ from the legendary mixers that came out in the 1950’s, 60’s and 70’s
- Dimensions: (L x W x H) 8.27" x 6.22" x 2.09"
How to Setup a Rockville Condenser Microphone with Your Computer:
Video of RCM03:
Unboxing Video of RCM03:
Description:
The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.The aluminum construction makes the RCM03 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ! The mic sounds crystal clear sound with no distortion!The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
- RCM03 Condenser Microphone (made of aluminum!)
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
- 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
- Metal shock mount
- Metal Anti-wind foam cap
- Owners Manual
- Warranty card
Features:
- Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- Aluminum high quality construction
- Polar Pattern: Internally Polarized Condenser Cardioid Design
- Large diaphragm for smooth, natural sound and low noise
- Power Requirements: 48V DC Phantom Power
- Uni-directional
- Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
- Output impedance: 200O±30%(at 1kHz)
- Standard operating voltage: 3V
- Operating voltage range: 1.5V-10V
- Current consumption: less than 500uA
- Voltage deduction characteristic: within 3dB at 2V
- S/N ratio: More than 24dB
- Frequency Response: 30Hz - 20 KHz
- Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
- Load impedance: Greater or = to 1000 Ohms
- Equivalent Noise level: Less than 18dB A (IEC581-5)
- Max. Input SPL: 126dB(THD=1.0% at 1kHZ)
- Electrical current: Greater than 4.8Ma
- Microphone body net weight:320 Grams (0.7 Pounds)
- Microphone Max.diameter 44mm (1.73” inches)
- Microphone Length 217mm (8.54” inches)
- Microphone material: steel grille + Alluminum (handheld part)
- PCB Layout: Surface mount
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free headphones