Ripe3D Quad External GPU Stand.

Now with Optional PSU Stand

The stand is designed to upto hold 4 GPUs with adequate space between card to provide spacefor cooling.
Each GPU is spaced with 80mm between each backplate.

If the PSU Bracket Addon is selected then this allows a ATX PSU to be attached to the GPU Stand. An added benefitof this is that it allows the GPU and PSU stand combo to be stood up on its side, saving even more desk space.

The stand come withFront Fan Mounting Points to be able to fit either 2x 120mm fans or 2x 140mm fans (Fans are not included)

The base has fixing points for four standard PCI-e riser cards to further secure your GPU to the stand. (Screws are supplied for this) for guaranteedfit) Stand has been tested with VER009S riser card, the stand should work with other riser varieties but no guaranteeis given.

The 120mm or 140mm fans can be attached using the standard screws that come with every new fan.

The base has holes for fixing the stand in place, but this is not required.
The hole pattern matches the hole spacing for 120 and 140mm pc case fans.

Cards shown in photos are for referenceonly and are not included.

Card Spacing
To calculate how much free space there will be between your cards, find the thickness of your card and take that away from 80mm, what you have left will be your air gap between the cards.

See my store for other GPUs stand setups including dual and single card setups.

Includes

1 X Base
1 x Front
2 x Top Side Fan Brackets
1 x Center Top fan Bracket
27 x Screws for assembly, along with screws to secure a PCI risercard andto secure the Graphics Card.

If PSU Bracket is included also included is;

1 x PSU Front Bracket
1 x PSU Strap
3 x Screwsfor assemblingstand (Does not include PSU Screws)

Note:The following are NOT includedGPU, PCI-e Riser, Fan and Screws for mounting the fan.

Assembly

1. Fix the Base and the Stand together using 3 screws on the bottom and 2 on the front.
   Note:if you want to secure the stand by screwing it down it is recommendedto do this now.
2. Attachyour fans to the front of the stand only fixingat the bottom for now (Do not attach fan brackets yet.)
3. Fix your PCI-e risers using Screws Provided. (Stand will still function without the brackets being fixed)
4. Insert your graphics cards into the stand
5. When fixing the GPUs at the top of the stand ensure to attach the Fan brackets as per photos.
6. Screw the top of the fans to your fan brackets.

If you have selected the PSU Bracket Addon;

1. Attach the PSU Front Bracket to the front of the Stand using two screws from the psu bracket in the the front part of the GPU Stand.
2. Attach the PSU strap to the base of the GPU Stand using 1 screw from the Base in to the PSU strop.
3. Proceed with the assemblyinstructionsas above, The PSU can be fitted at any point.

Additional colours may be available Message for more information.

Any questions please do not hesitate to contact, including questions regarding International shipping.