Raspberry Pi Retro Pre-Install Combo
- Raspberry Pi (your choice 4B, 3A+, Zero, Zero 2)
- SD Card (your choice 1GB, 64GB or 128GB)
You are not paying for any software. The software installed is free. You are paying for the Raspberry Pi, the SD card, and the service of doing it for you.
SD Card can be pre-installed for the following retro devices (If you order one of the below devices in the same order, it will be assumed which one you need pre-installed; otherwise you MUST send a message to us what you need pre-installed before shipments)Retro OS will NOT be installed; the device will be configured and ready for OS install when appropriate:
*Pi Storm(Emu68 or Musashi/Raspbian): Recommended 3A+ with SD Card 64Gb*Pi Storm 32 (Emu): Recommended 3A+, 4B, or CM4 with SD Card 64Gb*Pi SCSI: Recommended Zero W or Zero 2 W with SD Card 64Gb or 128Gb based upon desired size of HDD files*A314: Recommended Zero 2 W with SD Card 64Gb**RGB2HDMI: RecommendedZero or Zero 2 with SD Card 1Gb (WiFi is not necessary)
*Pi Storm, Pi SCSI, or A314 should be installed on 64GB or 128GB. 1GB do not support this. 64GB has a higher performance which may not matter on a retro device.**RGB2HDMI should be installed on 1GB, the size of this install is small and the extra space will be mostly unused unless you plan on creating a large quantity of screenshots. Also, note most RGB2HDMI adapters are ONLY compatible with Pi Zero / Pi Zero 2. If you order a 3A+ and the board requires a Zero, you will be shipped a Zero or Zero 2 and refunded the difference in price.
Pi SCSI: When combined with OLED for the Raspberry Pi, software will be pre-installed for the Pi SCSI OLED Display :Makerfocus OLED for I2C PiSCSI Raspberry Pi 128x32 128x64 |
