You may also like
Printhead Printer Head,for Kodak 30 ESP Office 2100 / 2150 / 2170 Hero 3.1 / 4.2
28.78 USD
Free shipping
934 935 Printhead Fit for HP Officejet Pro 6230 6830 6815 6812 6835 CQ163-80060
48.78 USD
Free shipping
Replacement Printer Print Head QY6-0055 For i9900 iP8500 i9950 ip9100 PRO9000 ️
58.78 USD
66.78 USD
Free shipping
12%
offReplacement Printer Print Head QY6-0086 For MX928 MX728 IX6780 IX6880 MX72
73.78 USD
Free shipping
Full Color QY6-0090 Printhead Printer Head for IB4020 4080 IB4180 TS8040
40.78 USD
Free shipping
Full Color QY6-0070 Printhead Printer Head for MP510 MP520 MX700 iP3300 iP3500
35.78 USD
Free shipping
Replacement Printer Print Head QY6-0039 Fit for 9100i S9000 S900 i9100 F9000
44.78 USD
Free shipping
Full Colors Printhead Fit for Ep son XP600/XP601/XP950/XP820 FA09050
291.78 USD
Free shipping
Print head QY6-0073 For IP3600 iP3680 MP560 MP540 MP620 MX860 MX870 MG5140
23.78 USD
Free shipping
Full Color PrintHead Print Head fit For PRO-100 PRO 100 QY6-0084 USA ️
140.78 USD
Free shipping
Reufrbished Printer Print Head fit for i9900 I9950 Pro900 9900i Mark II QY6-0076
71.78 USD
87.78 USD
Free shipping
18%
offPrintHead Fit For iP7220 iP7250 IP7240 IP7210 MG5420 MG5450 MG6400 QY6-0082 ️
36.78 USD
Free shipping
Reufrbished QY6-0068 Printhead for PIXMA iP100 IP110 performance and high quality.
Made of high-quality material, durable, firm and stable for us to use.
This is a cleaned, thoroughly tested and sealed Printhead.
Good stability, long lifespan.
Full color function.
Product Condition : Original Refurbished Printhead ,95% New.
Warranty : One Year Free Warranty , Life-long Service.
OEM code: QY6-0068
Compatible Models:
Fit for QY6-0068 PIXMA iP100 IP110
Packing includes:
1 x print head
Note:
1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.
After loading the print head, please don't install ribbon overhead 10 pieces of A4 document,
so that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.
2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,
so please troubleshoot the problem of the mainboard before replacing the print head. In addition,
the F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.
If replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.
3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.
There is a regulation that printhead is not warranty, and it is delicate and expensive.
please do not make commissioning on the machine, and please treat it with caution.
4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station
or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.
Before you install this product, you need to pay attention to:
1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.
2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.
3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.
4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.
5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.
6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.
About US
WELCOME to our store -[Darupsun]
Our company has been an member since 2008 in USA,with long time and rich experience of online selling.We believe we could 100% promise you will have a good shopping experience here.
We focus onAuto Parts,Motorcycle Parts,ATV&UTV Parts,RV Parts,Boat Parts,other hot sale items and so on,a research and development, sales and service with a professional high tech enterprise.We believe we are your best choice of online shopping.
[High Quality Product]- We focus on R&D, cooperating with professional manufacturers,ensuring that we provide our customers with top quality and innovative products.
[Perfect Fitment]- We aim to provide perfect aftermarket parts to your vehicle,ideal compatibility.
[Great Price]- We try our best to offer you the best price in all markets.
[Excellent Customer Service]- We try our best to service our customers all time,professionally and sincerely solve your problem.Any questions,please kindly feel free advice on us.
About Shipping&Returns
Please note that your item will typically be dispatched within 3 business days after payment confirmation. We have multiple warehouses across the United States, so the parcel will be shipped from the warehouse with the available stock, not only from our LA/Chino location.
Delivery usually takes 5-12 business days, depending on your delivery address and any potential shipping delays due to unforeseen circumstances.
If, for any reason, you are not satisfied with your purchase and would like to initiate a return, please contact us first. We will provide you with the return instructions to ensure the process is as smooth and cost-effective as possible.
We strive to offer the best service and aim to save you both time and money. Thank you for choosing us!
About response&Customer Service
We hope you’re enjoying your shopping experience with us! If you're happy with both the items and the service, we would greatly appreciate it if you could leave us a 5-star response. Your support means a lot to us!
If for any reason you are not satisfied with your purchase, before leaving negative response, we kindly ask that you reach out to us. We are committed to finding the best solution through open communication and believe we can resolve any concerns you may have.
We truly value your business and would love the opportunity to make things right. Thank you for your understanding and trust.
