RS232 to RS485 Converter Serial Adapter with 4 Position Terminal Block for Lon
- Port powered RS232 to RS485 Converter used in Long-haul Communication up to 4000ft (1200 meters)
- RS232 to RS485 adapter enables the connections of multiple bus nodes and 32 devices can be joined in RS-485 network
- Automatic RX - TX Control; RS-232 to RS-485 Converter controls the “Receive” and “Transmit” modes automatically
- Up to 115.2kbps baud rate (auto-detect) can be applied to point to point two wire half duplex and point to multi-point two wire half duplex communication
- A built-in Transient Voltage Suppressor (TVS) supports 600W anti-surge protection on each line of RS485 link which effectively guard devices from damage
RS-232 to RS-485 converters are mostly used in industrial and commercial environments. The reason is that the RS485 converter can be used for multi-drop networks, meaning that you for example can connect multiple RS485 devices to one computer. Up to 32 devices can be connected in one network to communicate on a single pair of wires (plus a ground wire). This type of communication is called half-duplex communication. Most quality RS485 converters can communicate in this manner of up to 4000 feet (1200 meters). RS232 to RS485 serial converter is also fairly resistant to noise which is one more reason why it is favored in industrial environments. Guard Your Value Equipment A built-in transient voltage suppressor (TVS) supports 600W anti-surge, effectively guard your value devices from the hazards of transient surges, lightning. No Driver Required Auto control data flow direction of I/O circuit feature makes it fully plug-and-play. Port-Power No external power supply required, it is port-powered from RS232 data lines and low consumption electricity. Mini-Size with 2 screws and terminal block Specific Standard: EIA/TIA RS232C / RS485 Baud Rate: 300bps - 115.2kbps Working Mode: 2 wire asynchronous half-duplex Communication Mode: Point to Point, Point to Multipoint Transmission Media: Twisted Pair (Wire diameter >= 0.5mm) or Shielded wire Transmission Distance: RS232 Interface: up to 50ft (15m); RS485 Interface: up to 4000ft (1.2km) Surge Protection: RS485 Interface, Each wire 600W Original Packing Included 1 X RS232 to RS485 Converter
Shipping
- We offer FREE shipping on all orders!
- We ship within Three business days of payment, usually sooner.
- We use a selection of shipping services such as UPS, FedEx, USPS etc.
- We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
- Local pickups and combined shipping options are not provided at this time.
Return
- You can return a product for up to 30 days from the date you purchased it.
- Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!
response
Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.
Contact Us
If you have any queries, please contact us via . We usually respond within 24 hours on weekdays.
Please visit our store to check out other items for sale!
Thank you for shopping at our store.
