Multifuctional POTS RJ11 Telephones + additional 2 Gigabit Ethernet over Fiber Optic Converters
One set (TX and RX), Fast Shipping.
Feature:
1. The phone over fiber extenders can offer alow-cost solution for extending limited reach POTS telephone lines to fiberoptical distances of over 12.4 miles using Single Mode (SM) type optical fibersand 0.31 miles using Multimode (MM) fibers. Besides extending 2 POTS telephonelines over the same fiber, it also can carry 2 Gigabit (10/100/1000Mbps)Autosensing Ethernet RJ-45 network port, which offers even more effectivere-use of fiber cables.
2. Suitablefor universal Fiber Types: Same extender supports Single mode fiber and Multimodefiber, Long transmission distance, SM(Single mode) up to 20 km (12.4 miles), MM(Multimode)up to 500m(0.31miles).
3. OurPhone over Fiber extenders can solve the problem of lighting protection foryour home/office etc. Because Lengthy copper cables, installed outdoors, areprone to attracting lightning, and this can damage electrical equipment in yourhomes.
4. No DelayTransmission and Protocol Support: Unlike VoIP products - these converterstransmit signals directly over fiber cables, thus offering NO DELAYS, plussupport for fax & legacy applications that is not supported by VoIP lines.
5. Plugand Play, Easy to operate. No setup or configuration needed, SC connector forfiber port, RJ-11 connector for telephone ports , RJ-45 for Gigabit Ethernet Autosensingport.
Note : 2/4/8 telephone share same metal box.
Specification:
Phone RJ11 port specifications:
1.Voice coding: PCM coding, 64Kbps per voice
2.Crosstalk attenuation: ≥65dB
3.Balanced noise: ≤63.7dBmop
4.Insertion loss: -3 ± 0.75dB
5.Frequency characteristics: 300 to 3400 Hz (-0.6 to +3 dB)
6.Relay port (FXO): connected to the switch
7.Two-wire AC input impedance: 200+680//0.1Ω (three components)
8.Ringing voltage: 35 ~ 150V
9.Ringing frequency: 17~60HZ
10.Return loss: 20 db
11.User Interface (FXS): Connect to the user's telephone
12.Two-wire AC input impedance: 200+680//0.1 Ω (three components)
13.User line loop resistance: less than 1KΩ (including phone)
14.Ringing voltage peak-to-peak value:
110~150V
15.Ringing frequency: 22~28HZ
16.Feed voltage: 28V
17.Feed current: 20~50mA;
18.Return loss: 20 db
19.Bell flow: AC90 plus or minus 15V
Ethernet RJ45 port specifications:
1. Rate: 100M/1000Mbps, full duplex, half duplex fully adaptive
2. Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)
3. Physical interface: RJ45, support AUTO-MDIX (cross line straight line adaptive)
Power supply:
1.Working voltage AC100~240V, DC5V/2A.
2.US/EU/UK/AU power supply adapter is available.
Package include:
1x Telephone over fiber Transmitter
1x Telephone over fiber Receiver
1x FREE 3M SC/SC SM fiber patch cord.
2 x External power supply adapters
1 x Manual
