Specification
Size: 257x257mm
compatible with : Lab X1 Series/ Lab X1-Carbon Combo/ Lab P1P
Packing list
1x Upgrade 257*257mm Build Plate PET-PEIAdvantage
1、Double-sided printing, It is convenient, durable and practical.
2、Suits variety of filaments, especially for PLA.
3、Easy to clean, just wipe it off with a soft cloth before printing or alcohol after printing.
4、It is a flexible steel platform .The coating is not easy to fall off and scratch. Can be gently bent thousands of times without being out of shape.
5、You only need to bend the PET-PEI with your hands, and the model can be easily demoulded without using other tools.
6、Easy to Install:The PEI-PET spring steel sheet is flat and flexible, lab X1 3D printer heated bed is magnetic, just put on it and print.About the adhesion of print bed:
1、Before printing, it is necessary to wipe the plate with a soft cloth to、ensure that there is no dust on the bed to affect the adhesion of the print bed.
2、Before printing, it must be leveled, keep a distance of A4 paper thickness between the nozzle and the platform, so as to avoid the nozzle scratching the surface and avoiding the deformation of the bottom surface of the print model.
3、After our extensive testing, we recommend PET to print PLA and TPU and PETG. PEI print PLA /PETG/PC/ABS /TPU /Nylon etc.About the cleaning of print bed after printing:
1、Wipe the stains with over 95% strength alcohol gently, the recommended cleaning time is less than 5 minutes.
2、Do not use any strong chemical reagents to clean PEI.About removing the prints:
1、The hot bed temperature must drop to room temperature before removing the prints, otherwise it is easy to cause the PET film to tear and fall off.
2、 The small prints can be taken off directly by hand, the large prints need to bent PET-PEI sheet by hand and removed without other tools.
【Upgraded Double Sided Printing】Double-sided PET+PEI spring steel plate , one side is smooth carbon fiber pattern print surface--PET film. The other side is PEI frosted surface, presenting the frosted sticker surface a distinctive frosted touch, provides greater adherence to the model and prints without warping.
【Flexible and Easy to Remove】The smooth PET+textured PEI spring steel sheet is flexible. Prints can be easily removed by hand once the build surface has cooled, or you can bend the build plate after the PEI plate cooled and remove the prints. The print mat won’t be out of shape.
【Good Adhesion】The model can be firmly attached to the surface of the print bed. Please let the build plate cool down before remove the model to avoid damaging the coating.
【Compatible Filaments】PET build plate surface only prints PLA filament.You'll need glue if you print other materials. PEI surface plates print most filaments like 3D Printers】The double-sided smooth PET+ textured PEI print bed suitable for 3D printers with 257x257mm platform size, such as suitable for Bambu Lab X1 X1C p1p X1-Carbon Combo. Please confirm your 3D printer platform size before ordering.