Factory Second Double-Sided Smooth PEI Spring Steel Sheet Factory Second

This is the replacement spring steel sheet with smooth double-sided PEI for the Original Prusa i3 magnetic heatbeds.

This is a FACTORY SECOND product. It is rated as factory second due to cosmetic and visual defects only. The cosmetic and visual defects do not impact functionality.
FACTORY SECOND products are completely unused.

Factory second product, fully functional with cosmetic and visual imperfections
Small shallow scratches in the PEI sheet
Unevenly cut PEI sheet outside the printing area
Visual defects of the PEI sheet
Small dent in the PEI sheet

Includes:
Spring Steel Sheet (1 pcs)
Smooth PEI-Ultem sheet (2 pcs) - already mounted and fixed in place on each side of the steel sheet

Attributes:
+ Perfect for PLA
+ Great adhesion with almost all materials
+ Smooth bottom of prints
+ Tiny details will stick great

Important:
- We do not recommend this build plate for PETG (PETG can stick too hard and damage the surface)
- Release agent might be necessary
- You must apply glue stick when printing flexible filaments

You can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest.
It does not affect functionality or adhesion. However, if you want to have the same surface look on the whole print bed, you can resurface it.
The easiest way is to take the hard side of a dry kitchen sponge and wipe the affected area with a circular motion gently a few times.
Find more details about the spring steel sheets in the Prusa knowledgebase .

The steel sheet color may differ from the product picture (black, gold, green, etc). The smooth PEI surface on the steel sheet, as well as all other properties, remain the very same for all color versions.

Fits:
Prusa CORE One
Prusa CORE One+
Prusa MK2.5
Prusa MK2.5S
Prusa MK3
Prusa MK3S
Prusa MK3S+
Prusa MK3.9
Prusa MK3.9S
Prusa MK4
Prusa MK4S

Prusa Warranty Note:
Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

Tiny dots may appear on the PEI-Ultem steel sheet surface.
These can slightly affect the finished print bottom surface. However, they do not impact the printing process, reliability in any way.
Prusa does not consider these dots a reason for a warranty claim.

To replace this part, please visit the Prusa knowledge base at [link removed by ]