Netgear WPN824 RangeMax – Stock Firmware
Exact Model: Netgear WPN824 RangeMax Wireless Router
Firmware: V2.0.120_1.0.15
Hardware:
• RangeMax MIMO (802.11g with up to 108 Mbps mode)
• 10/100 Ethernet switch + WAN port
• Simultaneous dual-antenna MIMO design
Current Status:
• LAN IP: 192.168.1.1
• SSID: NETGEAR
• Channel: 6
• Mode: Auto 108 Mbps
• Wireless AP: ON
• MAC addresses:
– LAN: 00:0F:B5:A7:E4:C0
– WAN: 00:0F:B5:A7:E4:C1
Performance note:
Real-world wired speed test through this unit was approximately 70 Mbps down / 72 Mbps up with 7 ms ping.
Wi-Fi note: The wireless radio is enabled in the interface, but Wi-Fi functionality was not tested with any client devices.
Router is fully functional on the wired side and currently running the stock Netgear firmware listed above. Classic early RangeMax MIMO model.
Please ask any questions before offerding. Thanks for looking!
