NOB Ergotron WorkFit-A Single LD Workstation w/Suspended Keyboard Black/Chrome
Item is new in open box with components sealed in original manufacturer packaging.
See photos for condition.
From the website:

• GTIN: 00698833040036
• Part Number: 24-390-026
• Product Weight: 36.9 lbs
• Shipping Weight: 44.4 lbs
• Description: WorkFit-A with Suspended Keyboard, Sit-Stand Workstation, LD Light Duty for standard-size monitors (polished aluminum)
• Includes arm, desk clamp, grommet mount, monitor riser, monitor pivot, keyboard tray support bracket, worksurface, keyboard tray, assembly fasteners, Velco, cable wrap, adjustment tools
• Can be configured to hold a laptop in place of monitor: order accessory Notebook Tray (50-193-200)
• Note: Extra-long cables may be required to span between standing and sitting heights
• * Weight Capacity: Maximum total load on height-adjustment assembly ≤ 20 lbs (9.1 kg). LCD weight = 5–15 lbs (2.3–6.8 kg), worksurface ≤ 5 lbs (2.3 kg), keyboard tray ≤ 2 lbs (.9 kg). For proper operation the total maximum weight when added together should not exceed 20 lbs (9.1 kg). The minimum total weight should not be less than 6 lbs (2.7 kg)
• The addition of the Dual Monitor & Handle Kit (97-783) accessory will reduce weight capacity by 6 lbs (2.7 kg). When installed, the combined weight of attached monitors should not exceed 9 lbs (4.1 kg)
• † Lift Range: LCD and keyboard adjust 20" (51 cm) in tandem; LCD adjusts 5" (13 cm) independently; maximum LCD height adjustment = 25" (63.5 cm)
• When in seated position, keyboard tray can drop down ≤ 4" (10 cm) below level of desktop surface, placing the keyboard at the optimum ergonomic height
• Mounting Surface Requirements: When installed using Desk Clamp option, can be configured to work with desk surfaces up to 31.5" (80 cm) deep. When installed using Grommet Mount option, center of through-hole should be no more than 29.5" (75 cm) from front edge of desk surface. These requirements ensure that the suspended keyboard tray can extend past the desktop’s front edge
• Keyboard tray can be installed in 3 different positions: centered, offset right or offset left
• Keyboard tray designed with slight tilt to ensure wrists remain in a neutral position during data entry and help prevent repetitive stress-injuries; tray can be flipped up 90º when not in use
• Keyboard Tray Dimensions: 27.1"W x 10.1"D (688 x 256 mm)
• Integrated cable management hides wires
• Worksurface Dimensions: Approximately 0.25"H x 22"W x 10"D (6.4 x 560 x 255 mm)
• Desk clamp attaches to edge up to 2.5" (65 mm) thick; grommet mount attaches through hole 0.5" to 2.5" (7–65 mm) wide and up to 2.5" (65 mm) thick
• Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
• This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissions of VOC (volatile organic compounds)
• Shipping Dimensions: 36" x 21.25" x 10.75" (941 x 540 x 273 mm)
• Warranty: Five years

Business Hours:

We are open Monday through Friday from 10am - 3pm Pacific Standard time to ship and respond to messages. We do not monitor inquiries Saturday, Sunday or holidays. If you send us a note after hours we'll reply back the next business day.

Shipping:

Your item will ship out within 3 business days of payment, although we do our best to get your item on its way sooner. We do not ship on Saturday, Sunday or holidays. If you’d like to pay extra for expedited shipping, let us know and we will try to accommodate your request but there is no guarantee we can.

CONDITION NOTES:

We source from estates in San Francisco California and therefore have limited knowledge as to the past life of listed items. We do inspect them and take photos to provide an accurate and detailed description, so please review carefully before offerding or buying. Otherwise items are sold as is.

Unless otherwise noted, electronic items will be tested to power on. If you have specific questions about functionality of any product please contact us before offerding or buying.

Let us know if you are unsatisfied for any reason before contacting . We love happy customers!