Introducing the newest creation from Pine Ridge Printing, the modular Radiator Adapter System for PC's and Servers!With this system you can adapt most 120/140mm fan-based radiator to fit any alternating mounting system (i.e. mounting a 480mm radiator to a case slot sized for 560mm, or a 360mm to a 420mm, etc).This system is intended to convert from 120mm to 140mm --- NOT from 120mm to 120mm or 140mm to 140mm (no, it won't work if you try to mount a 240mm radiator to a 360mm sized slot layout for example, as both are based on a 120mm fan. Same with 420mm to 480mm, etc).There are 2 options available:The Fully Modular System containing 4 sections (8 pieces total) which allows for flexible sizing combinations depending on your needs. This system allows for a more secure mounting solution, with all standard screws for mounting a standard radiator accessible.
The Non-Modular System containing 2 sections (2 pieces total) which allows for unlimited sizing combinations, as it consists of nothing but 2 end pieces, each with holes for 140mm and 120mm mounting hardware. With this minimalistic design, there is no limitation to your sizing choices aside from your own radiator and fans. Note however, that this design limits the structural security of the mounting application itself, as your heavy radiator will essentially be suspended from your case by only 4 screws connecting the adapter to the case, with only another 4 screws holding the radiator to the adapter itself.
********PLEASE REVIEW IMAGES IN DETAIL TO VERIFY FITMENT FOR YOUR SPECIFIC SITUATION BEFORE PLACING ORDER!!!!!!!! REFUNDS WILL NOT BE ISSUED DUE TO ORDERS PLACED WITHOUT BUYER CONSIDERING FITMENT AND ATTEMPTING TO ACHIEVE AN UNREALISTIC ADAPTATION. MESSAGES ASKING "WILL THIS WORK WITH XXXX TO YYYY" WILL NOT BE RESPONDED TO********