WiFi 6 MiMo Router Omni External Antenna Improve Data Throughput, Signal Stability and Signal Coverage

Will it improve my signal?

The elements in this antenna are similar to those inside most cellular and WiFi Internet gateway/routers. Placing the antenna next to the gateway/router will not improve your signal. Placing this antenna away from the gateway/router in a location with better signal coverage will improve signal quality and data throughput speeds. Maximize the values of SINR and RSRQ, not RSSI, RSRP or "bars".

• 🔴4G/5G Full Band: GSM-202 is a cross-polarized omnidirectional MIMO antenna with a standard gain of 4.5 dBi. Its broadband frequency is 700-6000 MHz, covering all 4G, LTE, 4G+, 5G NR and 5G mobile frequency bands around the world. The 2X2 MIMO design enables optimal throughput and quality improvements, resulting in better coverage and performance, suitable for indoor and outdoor environments and especially urban areas with good signal coverage.
• 🔴Note: 1. Please note that the maximum gain of this antenna is 4.5 dBi. It is primarily designed for use in areas with strong signal coverage and should not be considered as a high gain antenna option. 2. After connecting the antenna, please turn on the external antenna function of the router. 3. This 2X2 antenna is suitable for routers with two LTE interfaces. A 4X4 router requires two 2X2 antennas or one 4X4 LTE antenna. 4. TP-Link router requires RP-SMA Adapters, please order it by yourself.
• 🔴Multifunctional application scenarios: This LTE antenna is compatible with the Bluetooth, WiMAX, Zigbee and WiFi 6 frequency bands. MIMO design can effectively increase data throughput and improve network experience. Therefore, it has a wide range of applications: all routers, optical modems, MiFi, CPE, WAP, wireless hotspots, smart meters, in-vehicle networking devices, smart agriculture, and IoT and M2M devices.
• 🔴Easy Installation: This antenna is designed for wall, roof or pole mounting. Because it is an omnidirectional antenna, it does not need to be aimed at cell towers, making installation easier. 3 meters of coaxial cable allows installation through the wall. For a stable and easy installation process, a U-bolt pole mounting kit is included, which can be securely attached to poles with a diameter of 30 to 50 mm.
• 🔴About the antenna extension cable: It is not recommended to use RG174 or RG58 as an extension cable. Please use an extension cable over LMR195. The total length should not exceed 5 meters. Based on your specific requirements, low-loss coaxial cables and connectors can be recommended. For further information, please contact Maswell's customer service team via order email.

Technical SpecificationsFrequency Range700-6000 MhzPolarizationLinearGainUp to 4.5 dBiV.S.W.R<2.0Impedance50 OhmCable3M coaxial cableConnector Type2 Leads SMA-Male with TS9 AdaptersOperating Temperature-40°C to +85°CRelative HumidityUp to 95%Vibration10 to 55Hz with 1.5mm amplitude for 2 hoursMaterialABS