JAYO 3D Resin 405nm UV for LCD/DLP/SLA 3D-Resin PrinterParameter:
RGB LCD Screen:
Bottom Exposure:20-80s
Normal Exposure:4-15s
Monochrome Screen:
Bottom Exposure:10-60s
Normal Exposure:1.5-4s
Important Safety Instructions:
- Shake the bottle before use
- Recommended temperature 20°C - 25°C
- Protect it from dust and direct sunlight
- Keep it out of the reach of children.
- Avoid skin and eye contact with liquid resin. Wash off immediately with plenty of water if resin gets on the skin.
- Shore Hardness: 80-85D;
- Shrinkage: 7-9%
- Flexural strength: 35±10%MPa
- Extensibility: 20-40 Mpa
- Elongation at break: 5-15
- Shelf life: 12 months
Vivid color
JAYO 3D standard resin uses high-quality formulation technology to develop multi-colored resin products with low odor and high flow properties Monochrome Black, Monochrome White, Monochrome Gray, Monochrome Skin, Monochrome Orange, Monochrome Green; clear, clear blue, clear red, clear green A total of 10 colours
Low shrinkage
The shrinkage rate of JAYO resin is between 7-9% and the pressure effect is good. After curing, it can maintain the three-dimensionality of the model for a long time, which is a good manifestation of you bringing out your imagination to the fullest.
High stability
JAYO branded resins are compatible with most 405nm LCD/SLA resin printers on the market due to their excellent performance for general modeling and industrial prototyping
![Buy Now Buy Now](buy.gif)