Standard Resin
ABS-Like Resin
Water washable Resin
PA-Like Resin
JAYO 3D Resin 405nm UV for LCD/DLP/SLA 3D-Resin PrinterParameter:
RGB LCD Screen:
Bottom Exposure:20-80s
Normal Exposure:4-15s
Monochrome Screen:
Bottom Exposure:10-60s
Normal Exposure:1.5-4s
- Shore Hardness: 75-80D;
- Shrinkage: 6-8%
- Flexural strength: 25-50
- Extensibility: 20-45 Mpa
- Elongation at break: 20-50
- Shelf life: 12 months
Good performance in toughness
Improved toughness, JAYO nylon-like 3D printing resin has higher toughness than traditional 3D resin. Models that can withstand large tensions cannot easily break. High-quality 3D resin for resin printersHigh precision and filigree prints
Use high-quality materials and a rigorous production process,
to achieve a high-precision nylon resin printing effect. With a delicate printing model and a clear surface texture, you can really achieve a smooth and comfortable printing experienceIncrease in hardness
Nylon-like resin with increased hardness, which is harder than ABS-like resin. The model is drillable, but not brittle. It meets your needs for printing models with high hardness
Standard Plus Resin
ABS-Like ResinStandard ResinWater Washable ResinPlant-Based ResinPrinter Setting:RGB LCD Screen:Bottom Exposure:20-80sNormal Exposure:4-15sMonochrome Screen:Bottom Exposure:10-60sNormal Exposure:1.5-4sPrinter Setting:RGB LCD Screen:Bottom Exposure:20-80sNormal Exposure:4-15sMonochrome Screen:Bottom Exposure:10-60sNormal Exposure:1.5-4sPrinter Setting:RGB LCD Screen:Bottom Exposure:30-80sNormal Exposure:4-12sMonochrome Screen:Bottom Exposure:10-60sNormal Exposure:1.5-3.5sPrinter Setting:RGB LCD Screen:Bottom Exposure:20-80sNormal Exposure:5-15sMonochrome Screen:Bottom Exposure:10-60sNormal Exposure:2-4s
- Shore Hardness: 70-80D;
- Shrinkage: 6-8%
- Flexural strength: 30±10%MPa
- Extensibility: 20-35 Mpa
- Elongation at break: 20±5%
- Shelf life: 12 months
- Shore Hardness: 80-85D;
- Shrinkage: 7-9%
- Flexural strength: 35±10%MPa
- Extensibility: 20-40 Mpa
- Elongation at break: 10±5%
- Shelf life: 12 months
- Shore Hardness: 80-85D;
- Shrinkage: 6-8%
- Flexural strength: 45±10%MPa
- Extensibility: 30-50 Mpa
- Elongation at break: 11±3%
- Shelf life: 12 months
- Shore Hardness: 80-85D;
- Shrinkage: 7-9%
- Flexural strength: 30±10%MPa
- Extensibility: 20-35 Mpa
- Elongation at break: 5-12%
- Shelf life: 12 months
Standard Plus ResinPA-Like ResinPrinter Setting:RGB LCD Screen:Bottom Exposure:30-80sNormal Exposure:4-15sMonochrome Screen:Bottom Exposure:20-60sNormal Exposure:1.5-3sPrinter Setting:RGB LCD Screen:Bottom Exposure:20-80sNormal Exposure:4-15sMonochrome Screen:Bottom Exposure:10-60sNormal Exposure:1.5-4s
- Shore Hardness: 80-84D;
- Shrinkage: 7-9%
- Flexural strength: 35MPa
- Extensibility: 33 Mpa
- Elongation at break: 15%
- Shelf life: 12 months
- Shore Hardness: 70-80D;
- Shrinkage: 6-8%
- Flexural strength: 20-45MPa
- Extensibility: 25-50 Mpa
- Elongation at break: 20-50%
- Shelf life: 12 months
JAYO 3D Resin 405nm UV For LCD/DLP/SLA 3D PrinterImportant Safety Instructions:
- Shake the bottle before use
- Recommended temperature 20°C - 25°C
- Protect it from dust and direct sunlight
- Keep it out of the reach of children.
- Avoid skin and eye contact with liquid resin. Wash off immediately with plenty of water if resin gets on the skin.
On Apr 17, 2024 at 02:45:54 PDT, seller added the following information:
![Buy Now Buy Now](buy.gif)