From ZZXIO comes this converter to allow IBM PS/1 and PS/2 computers to use standard floppy drives. These models of IBM computers have the power provided over the 34 pin connector, which will fry a "modern" floppy drive. This adapter routes the power out of the 34 pin connector into a traditional 4-pin Molex connector.There is a single jumper on the unit that allows pin 4 to either be passed through directly to the drive or to a resistor connected to ground. The default is to directly connect pin 4 to the drive.
This is not for systems/drives with an edge connector. They are available is a list of models this was confirmed to work on, I will update the list as people provide response.25-28630-808630-28655 SX90L40 SX (original battery won't fit when the adapter is used)P70 (Use a floppy drive less than 140mm in length with the faceplate removed)P75 (Use a floppy drive less than 140mm in length with the faceplate removed)Reply TurboBoard 60/65/80
This adapter will not work with systems that require media sensedrives. An adapter will be available shortly for these systems.
I offer free returns if the adapter turns out to not be compatible with your system.