IBM 00E9912 300GB 15K SAS 6Gb/s 2.5" SFF SFF-3 Hot Swap HDD Drive Disk
Refurbished | Free Shipping | Allstate-Serviced Warranty | Money Back Guarantee
Fully Tested | SAS 6Gb/s | 2.5-Inch SFF | 300GB | 15K RPM | IBM P/N: 00E9912 | SFF-3 Hot Swap
Designed for supported IBM server and storage systems that accept 2.5" SAS hot-swap hard drives.
Avoid compatibility mistakes and downtime. This exact IBM 00E9912 enterprise 2.5" SAS SFF-3 hot-swap hard drive is sold as Refurbished, professionally tested, and identified by the correct IBM part number 00E9912—so you can validate fitment before deployment and order with confidence.
Built for business and datacenter environments, this 300GB 15K SAS drive is a practical choice for server replacements, RAID arrays, hot spares, and maintenance inventory where matching interface, speed, form factor, and IBM part number matters.
Testing / Functional Status (Fully Tested)
This drive is fully tested and verified for proper operation prior to shipment. Our goal is simple: deliver a reliable enterprise hard drive that’s ready for installation and backed by the protections associated with the Refurbished program.
Typical validation includes:
Power-on / initialization verification
Health check and functional read/write verification
Interface detection and stability confirmation
Hot-swap carrier and connector inspection when applicable
Interface, Compatibility & Downtime Risk (Read This)
Interface: SAS 6Gb/s (Serial Attached SCSI)
Form Factor: 2.5-inch SFF
Drive Type: SFF-3 Hot Swap
Important: This is SAS, not SATA. A SATA-only backplane or controller will not accept a SAS drive.
For server installs, confirm controller/backplane compatibility, firmware expectations, and whether your chassis requires a specific IBM SFF-3 hot-swap tray/caddy/carrier.
If you’re replacing an existing drive, matching the IBM part number 00E9912 and SFF-3 hot-swap format helps reduce ordering errors and speeds deployment approval.
Specifications
Brand: IBM
Part Number: 00E9912
Capacity: 300GB
Form Factor: 2.5" SFF
Interface: SAS 6Gb/s
Speed: 15,000 RPM
Drive Type: Enterprise Hard Disk Drive (HDD)
Hot-Swap Type: SFF-3
Use Case: Servers, RAID arrays, hot spares, enterprise storage with systems that support 2.5" SAS 6Gb/s SFF hot-swap hard drives, including many IBM server and storage configurations using SAS controllers/backplanes. Please verify:
SAS controller/backplane support (SAS required)
SFF-3 hot-swap tray/caddy/carrier requirements for your exact system
Any firmware / RAID compatibility requirements for your environment
Matching IBM FRU / option part number requirements for production installs
Why Buy Refurbished
This item is offered through the Refurbished program from a quality-vetted seller. states that Refurbished products include free shipping, 30-day free returns, and an Allstate-serviced warranty, with Money Back Guarantee also applying. That gives you two layers of protection: warranty coverage and transaction protection.
Warranty Note (Important)
If your listing is in the Certified Refurbished tier, states the included Allstate-serviced warranty is two years.
If it is listed under Excellent / Very Good / Good, states the included warranty is one year.
Use the warranty length that matches your specific refurb tier.
What’s Included
IBM 300GB 15K 2.5" SAS 6Gb/s SFF-3 Hot Swap HDD (00E9912)
Only the item shown in the photos is included unless otherwise stated. For server parts, please review photos to confirm whether any tray, caddy, or bracket is included.
Buy with confidence from an Refurbished seller offering free shipping, tested enterprise hardware, and verified IBM part-number identification—a dependable replacement option for supported SAS enterprise server environments.
