HPE ProLiant DL380 Gen9 8SFF ServerDual Intel Xeon E5-2699v4 | 128GB DDR4 REG | P440ar SAS | 2× 240GB SSD, 6× 300GB HDDProcessors2× Xeon E5-2699v4Memory128GB DDR4 REGStorage8 drives installedRAIDP440ar SAS ControllerOverview
This HPE ProLiant DL380 Gen9 is professionally inspected, cleaned, configured, and fully tested before shipment. It is an excellent platform for virtualization, private cloud, storage, backup, database, hosting, and general enterprise infrastructure.
The server is sold in the configuration shown below. Additional memory, drives, network adapters, rails, and other upgrades are available upon request.
Installed DL380 Gen9GenerationHPE ProLiant Gen9Form Factor2U RackmountDrive-Bay Configuration8× 2.5-inch SFF BaysProcessors2× Intel Xeon E5-2699v4Installed Memory128GB DDR4 REGRAID ControllerP440ar SAS ControllerInstalled Storage2× 240GB SATA 2.5-inch SSD, 6× 300GB 10K SAS 2.5-inch HDDNetwork AdapterOnboard / integratedPower Supplies2× 500W Flex Slot Power SupplyRemote ManagementHPE iLO 4Operating SystemNot IncludedRail KitAvailable SeparatelyWarrantyOne-Year Seller Hardware WarrantyConditionProfessionally Refurbished and TestedImportant Drive-Bay Information
This is a 8-bay 2.5-inch SFF chassis configured with a P440ar SAS RAID controller.
- Supports compatible 2.5-inch SAS and SATA drives.
- 8 drives installed: 2× 240GB SATA 2.5-inch SSD, 6× 300GB 10K SAS 2.5-inch HDD.
- NVMe support depends on the installed backplane, cabling, and controller configuration and should not be assumed from the chassis designation alone.
- Drive trays/caddies included
Platform Capabilities
- Supports Intel Xeon E5-2600 v3 / v4 (Haswell/Broadwell-EP), up to 22C processors
- Dual-processor architecture
- 24 DDR4 DIMM slots, up to 3TB memory
- Up to 8× 2.5-inch SFF drive bays
- Redundant hot-plug power supplies
- Enterprise RAID and storage options
- Multiple PCIe expansion and networking options
- HPE iLO 4 remote-management platform
Professionally Tested
- Chassis and internal components cleaned
- HPE hardware diagnostics completed
- Processor and memory testing
- RAID controller and cache status checked
- Network ports tested
- Power supplies tested under load
- Fans and thermal operation checked
- Firmware reviewed and updated as appropriate
- Burn-in and final boot testing
- Final visual and configuration inspection
What Is Included
- 1× HPE ProLiant DL380 Gen9 8SFF Server
- 2× Intel Xeon E5-2699v4 Processors
- 128GB DDR4 REG Memory
- 1× P440ar SAS Controller
- 2× 240GB SATA 2.5-inch SSD
- 6× 300GB 10K SAS 2.5-inch HDD
- 2× 500W Flex Slot Power Supplies
- HPE iLO 4 Remote Management
- 6× Fans
- Drive Trays/Caddies included
Custom Configuration Options
- Additional DDR4 Memory
- Enterprise SAS or SATA 2.5-inch HDDs / SSDs
- Compatible NVMe Configurations
- Alternative RAID or HBA Controllers
- 10GbE, 25GbE, or Higher-Speed Networking
- Rail Kits, Bezels, and OS Installation
Need a custom configuration?
Send us your workload, required memory, usable storage capacity, RAID preference, and network requirements. We can recommend a compatible configuration and create a custom listing for your exact requirements.Please Review Before Purchasing
Please review all listing photos, specifications, and included components before purchasing. Actual photos should be considered part of the item description.
If you require a specific drive configuration, RAID setup, memory configuration, network adapter, iLO 4 license level, rail kit, bezel, or other option, please contact us before placing your order.
