Contact Aruba FlexNetwork 5130 48G PoE+ L2 3 EI Switch 48-port 10/100/1000 + 4x SFP+JG937AHPE Aruba Lifetime Warranty - see Tested, Reset to Factory default - see picturesProduct Description: All portsworking
Rack mounts included
**PLEASE NOTE**
This is a multi-item listing and stock pictures are used for the description. There may be some variation between each switch.
External scuffs, scratches, etc. are visible but functionality is unaffected.
HP 5130-48G-PoE+-4SFP+ (370W) EI Switch (JG937A)OverviewThe HP 5130 EI Switch Series delivers flexibility, scalability and low TCO at the access layer of medium and large enterprise campus networks. Offering enterprise class QoS and security, HP Intelligent Resilient Framework (IRF) stacking, static layer 3 routing and RIP, convenient fixed 10GbE uplink ports, PoE+, ACLs, IPv6 and delivers energy savings with Energy Efficient Ethernet.
The HP 5130 EI Switch Series is SDN ready with OpenFlow 1.3 support, can be managed with HP Intelligent Management Center (IMC) for a single view of your entire network, and includes Lifetime Warranty 2.0.FeaturesScalable and Flexible Access Layer SwitchesThe HP 5130 EI Switch Series delivers flexibility, scalability and low TCO at the access layer of medium- and large-enterprise campus networks. The 5130 supports stacking, fixed 10GbE ports, static layer 3 routing and RIP v1/v2, PoE+, ACLs, IPv6 and power savings with Energy Efficient Ethernet.The HP Intelligent Resilient Framework (IRF) virtualises up to nine physical switches into one logical device for simpler, flatter, more agile networks and longer distance stacking of up to 70 km.Four fixed 10GbE uplinks (SFP+) deliver performance for bandwidth intensive applications.Includes Software-defined Network (SDN) capabilities with OpenFlow 1.3 support for future proofing your network.Lifetime Warranty 2.0 with 3 years 24x7 phone support and no software licensing required.Improved Quality of Service with Traffic ManagementThe HP 5130 EI Switch Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch.Provides traffic prioritisation with supported congestion actions include: strict priority (SP) queuing, weighted round robin (WRR), weighted random early detection (WRED), and SP+WRR and traffic policing with Committed Access Rate (CAR) and line rate.Reduce unwanted network traffic with broadcast control allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic.Comprehensive Security ControlThe HP 5130 EI Switch Series supports flexible authentication methods including 802.1X and MAC Authentication for greater security and policy-driven application authentication. Per-user access control lists (ACLs) provide identity-driven security and access control.ACLs provide IP Layer 2 to Layer 4 traffic filtering; supports global ACL, VLAN ACL, port ACL, and IPv6 ACL.Security with encryption of access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3, and other features including DHCP protection, IP source guard, dynamic ARP protection and RADIUS/HWTACAS.Single View of the NetworkThe HP 5130 EI Switch Series can be seamlessly managed with HP Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.
The HP 5130 EI Switch Series delivers flexibility, scalability and low TCO at the access layer of medium and large enterprise campus networks. Offering enterprise class QoS and security, HP Intelligent Resilient Framework (IRF) stacking, static layer 3 routing and RIP, convenient fixed 10GbE uplink ports, PoE , ACLs, IPv6 and delivers energy savings with Energy Efficient Ethernet. The HP 5130 EI Switch Series is SDN ready with OpenFlow 1.3 support, can be managed with HP Intelligent Management Center (IMC) for a single view of your entire network.
Product Name Variations:
- HP JG937A 5130-48G-POE+ 48 Port Gigabit PoE Switch - SAME DAY SHIPPING
- Hp Aruba 5130-48g-poe+-4sfp+ Ei 370w 48-port Gigabit Managed Poe Switch Jg937a
- HP 5130-48G-POE+-4SFP+ EI Switch - Manageable - 3 Layer Supported - 1U High
- HP 5130-48G-PoE+-4SFP+ EI Switch 48 Ports L3 Managed Stackable (JG937A#ABA)
- HP 5130-48G-POE+-4SFP+ EI Switch
- HP 5130-48G-PoE+-4SFP+ EI
- Hp Jg937a 5130-48g-poe+ 4sfp+ (370w) Ei Switch 48 Gbe Poe+ Managed Switch
- JG937A HPE 5130-48G-PoE+-4SFP+ (370W) Ei Switch
- Hp Jg937a 5130-48g-Poe+-4sfp+ Ei Switch L3 Managed 48 X 10/100/1000 + 4 X 10 Gig
- Hewlett Packard JG937A#ABA Network Switches
- 5130-48G-POE+-4SFP+ EI Switch
- 5130-48G-POE+-4SFP+ EI SWITCH
- HP 5130 48G POE 4SFP EI SWCH HEC0NSGSK-1010
- Hewlett Packard Enterprise Jg937A#Aba Hp 5130-48G-Poe+-4Sfp+ Ei Swch
- HP FlexNetwork 5130 JG937A 48-Port Rackmount Managed Switch
- HP 5130-48G-PoE+-4SFP+ EI - switch - 48 ports
- HPE 5130-48G-PoE+-4SFP+ EI - Switch - L3 - managed - 48 x 10/100/1000
- Hewlett Packard Enterprise JG937A#ABA 5130-48G-POE+-4SFP+ EI SWITCH
- Hewlett Packard Enterprise JG937A#ABA 5130-48G-PoE+-4SFP+ EI - Switch - L3 - man
- HPE 5130-48G-POE+-4SFP+ EI Switch
- Hewlett Packard JG937A#ABA Hp 5130-48G-Poeplus-4Sfpplus Ei Swch
- HPE FlexNetwork 5130 48G PoE+ 4SFP+ (370W) EI Switch
able 1 shows the quick spec.
Product Code
JG937A
Type
HPE FlexNetwork 5130-48G-PoE+-4SFP+ (370W) EI Switch
I/O ports and slots
48 x RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
4 x SFP+ fixed 1000/10000 SFP+ ports
Additional ports and slots
1 x RJ-45 serial console port
Memory and processor
1 GB SDRAM
512 MB flash
packet buffer size: 1.5 MBReliability
MTBF (years): 48.3
PoE power
370 W PoE+
Maximum power rating
490 W
Dimensions
4.36 x 44 x 36 cm (1.72 x 17.32 x 14.17 in)
Weight
8 kg (17.64 lb)
Product DetailsFigure 2 shows the front panel of HPE JG937A.
Note:
①
48 × 10/100/1000Base-T autosensing Ethernet
port
②
4 × SFP+ port
③
Console port
④
Port LED mode switching button
Figure 3 shows the back panel of HPE JG937A.
Note:
①
AC-input power receptacle
②
Grounding screw
③
RPS receptacle
· 48 x RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
· 4 x SFP+ fixed 1000/10000 SFP+ ports
Terms & Condition- Products found to be physically damaged by customer or during return transit due to inadequate/unprotected packaging (returned items should be shipped in protective packing similar as when shipped to Customer), warranty will be voided and cannot be exchanged or refunded.
- All returned items will be tested upon arrival and will attract a handling fee of $20 plus return postage to customer if found to be in correct working condition.
- The benefits provided to you under the various warranty of different items are in addition to other rights and remedies available to you under the Australian Competition and Consumer Act. In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For more information visit Australian Consumer Law's website.
30 Days Change of Mind Returns
If you receive a purchase, and you have decided that it does not meet your needs, we can accept a return for refund (Excluding delivery costs) or replacement if the following terms are met the following condition:
- The item must be returned to us within 30 days of delivery in original undamaged packaging.
- The item must be factory sealed and unused, or at the same condition as it was delivered, in order to be approved for a full refund.
- If the item has been opened, a restocking fee of 20% may apply, as the goods are no longer considered brand new.
- In the event that the product has been used, the restocking fee charged may be up to 50%.
- Any delivery or insurance costs incurred are not refundable.
- We reserve the right to refuse a refund on a returned item if the item is not in resalable condition (eg. damaged or missing packaging, missing or damaged parts)
Payment & Pick Up OptionWe accept PayPal and Bank Deposit for payment.Our Bank Details:
Account Name:KlearviewBank:ANZBSB:012291Account Number:494937134Please use your Username as payment reference (not item number).
Order will be process after payment clear at bank.
Pickup is available withprior arrangements only. PleaseContact Usbefore buying on .
![Buy Now Buy Now](buy.gif)