HP J9086A 2610-24/12PWR ProCurve Switch 24x 10/100 + 2x GB+ 2 SFP INCL 1X SFP

Dear customer,

When there might be a difference between the automatic generated specifications by the system, and the hand written/typed description, then please be aware that the only correct description is what's written by our selves here in the description.
Specifications above might be slightly different.
Thanks for your understanding.

INCLUDING 1X SFP MODULE

EXCLUDING NETWORK CABLES

Price is for 1 item

See photos for actual item

Ports

• 24 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX)
• Media Type: Auto-MDIX
• Duplex: half or full
• 1 RJ-45 serial console port
• 2 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
• Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
• 2 open mini-GBIC (SFP) slots

Physical Characteristics

• Dimensions: 9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x 4.39 cm) (1U height)
• Weight: 7.5 lb. (3.4 kg)

Memory and Processor

• MIPS @ 300 MHz
• 16 MB flash
• 128 MB SDRAM
• Packet buffer size: 1 MB

Performance

• 100 Mb Latency: < 4.1 µs
• 1000 Mb Latency: < 2.9 µs
• Throughput: up to 9.5 million pps
• Routing/Switching capacity: 12.8 Gbps
• MAC address table size: 8,000 entries

Environment

• Operating temperature: 32ºF to 122ºF (0ºC to 50ºC)
• Operating relative humidity: 15% to 95% @ 104ºF (40ºC), non-condensing
• Non-operating/Storage temperature: -40ºF to 158ºF (-40ºC to 70ºC)
• Non-operating/Storage relative humidity: 15% to 90% @ 149ºF (65ºC), non-condensing
• Altitude: up to 10,000 ft. (3 km)
• Acoustic: Power: 46 dB, Pressure: 38.4 dB; DIN 45635T.19 per ISO 7779

Electrical Characteristics

• Maximum heat dissipation: 181 BTU/hr (190.96 kJ/hr), (switch-only BTU/hr: 181; combined switch + max. PoE devices at 15.4 W: 827 BTU/hr)
• Voltage: 100-127 / 200-240 VAC
• Current: 2.5 / 1.3 A
• Maximum power rating: 62 W
• Frequency: 50 / 60 Hz
• Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
• Power consumption: 62 W without PoE; 189 W with PoE.

Comes as shown on picture, if something is noton the picture it's not included unless stated otherwise.

align="center">dewabit