Product Features Extrusion: Double gear extrusion Maximum print temperature: 260℃ (Can be upgraded to 500℃) Weight: 211g (including heat block, cooling fan) Maximum extrusion: 7.5kg (depending on Filament) Extrusion (based on existing): 600mm3/min (depending on Filament ) Number of pulses:Step motor drive at 932steps/mm at 16 segments (further correction required) Motor recommended current: 800mA Filament diameter and tolerance: 1.75±0.05mm Product Size XYZ size (including fan): 76.8x38x77.2mm Nozzle diameter: 0.4mm Heater specificationsHead size: 5 x 20mm Power: 40w Fan specifications Size: 35 x 35 x 10mm Voltage: 24V Speed: 6000 g/min (±10%) Line length: 1mStepper Motor specifications Motor length: 1000mm Rated voltage: DC3.45V Rated current: DC 1.5A/phasePackage Included H2 Extruder*1
✔️Upgraded Version of Stainless Steel Gear: using bimetallic tube (copper alloy + GRADE5 titanium alloy), high temperature resistance, durability, high precision, and higher surface finish. The output gear modulus design was changed from 0.5 to 0.25, reducing the gear outer diameter, effectively solving the weak points of V1.0 gear jamming and unsmooth extrusion.
✔️All-in-one Design & High Precision: The short-range extruder integrates the hot end of the nozzle, extruder, stepping motor, cooling fan, etc., double-gear extrusion, fast extrusion of consumables, short-range extrusion, short thread, and accuracy High, the control of the feeding amount is more accurate than remote extrusion, the withdrawal is more accurate, and the printing quality is better.
✔️With a smoothness of Ra0.4 on the inner walls of the throat and nozzle, it prevents clogging. H2 V2S uses a silicone protector with a high quality titanium-copper alloy hose for better heat dissipation and high temperature resistance, with printing temperatures of up to 270°C. The hose is easy to disassemble, making it even easier to use. Convenient.
✔️Lightweight & Compact & Powerful: H2 V2S extruder weighs only 195 grams, which effectively overcomes the short-stroke print head's heavier shortcomings, and is especially suitable for dual-jet printers. Using dual drive gears with internal gear ratio of 7:1, it has excellent performance and greater torque, reaching 770mN.m.
✔️Wide Compatibility: H2 V2S extruder has wide compatibility and can be installed in common 3D printers on the market, such as: B1, Ender 3(V2), Ender 6, CR-10S Pro, CR-10 V2/V3, Mega X, X1 Genius, etc. At the same time, you can also DIY according to your personal needs and update the corresponding firmware to meet your DIY needs.
