- Store
- New Arrivals
- Add to Favorite
- View response
- Contact
Dual Electric Cooling Fan Relay Switch Kit 4 Pin Radiator Electric Fan ThermostatDescription Current Rating 40 Amps Wattage 18 watts Coil Voltage 12 Volts Package Dimensions 6.69 x 5.87 x 2.32 inches; 13.76 ounces Operation Mode Electric Brand MOCW Manufacturer Kunttai
- Temperature switch turns on fan approximately at 185 Degrees and Off at 175 Degrees. The temp sensor has a 3/8 inch pipe thread, and a 1/2 inch adapter included
- Easy to follow wiring diagram simplify wiring your dual electric fans. RED to 12VDC Positive Battery Terminal, COFFEE to Fan Positive, BLACK to Ignition, GREY to Sending Unit per wiring diagram. Direct replacement part fits 10, 12, 14, and 16 inch cooling fans .
- The electric cooling fan thermostat kit comes with everything you need, includes 40A relay, wiring harness, thermostat switch, 3/8 inch to 1/2 inch adapter, inline fuse holder, 2 20amp fuse, 1 spade connector for the temp sensor, 8 ring terminals, and 4 wire connectors
- Usage method: Connect the color coded wires according to the diagram and the following notes: Red - to + 12VDC. Coffee - positive to fans. Black - ignition. Gray - sending unit.
- The package includes: 1 x wiring diagram; 2X 40A relay with harness; 1 x 185\'f switch - 175\'f temperature switch; 1 x 3 / 8 inch threaded probe; 1 3 / 8-inch to 1 / 2-inch adapter; 2 x inline fuse holders; 2 x 20 amp fuse; 8 ring terminals; 4 x fan tail connectors.
Product Description Dual Electric Fan Relay Kit with Thermostatic Sensor Switch 185 on 175 Off 40A Radiator Electric Cooling Fan Wiring Install Kit Waterproof 40A dual fan relay kit with color coded wires for easy installation (wiring diagram included in package).
Specifications:
Voltage: 12VDC
Wire Coil Power: 1.8W.
Rated Current: 40A
Protective characteristics: Waterproof Approx. 185 degree off - 175 degree on.
Type: Thermostatic Fan Kit
Fitment Type: Direct Replacement
Placement on Vehicle: Front
Material: Metal and Plastic
Length of wire: 50cm/ 19.68in
Thread size: the temperature sensor has a 3 / 8 inch (about 1.9 cm) pipe thread and contains a 1 / 2 inch (about 1.3 cm) adapter.
Direct replacement parts, suitable for 10 inches (about 25.4 cm), 12 inches (about 30.5 cm), 14 inches (about 35.5 cm) and 16 inches (about 40.46cm)
usage method:
Connect the color coded wires according to the chart (product picture 2) and the following notes:
Red - to + 12VDC
Coffee - positive to fans
Black - ignition Gray - sending unit
Fitment:
10\", 12\", 14\" and 16\" fans including dual fans.
We suggest using one separate relay wiring kit for each fan.
The thermostat supplied with this kit is OE style and can be installed on the cylinder head of the engine or any water jacket.
Do not use adhesive tape on the sensor, which may lead to poor electrical contact or incorrect temperature reading.
If you plan to install a high configuration cooling fan, you can crimp or weld larger wires.
1.5 square wires (15 Amps) are not large enough to withstand the extraction of high amps
No. 12 -20 Amps
No. 10 - 30 Amps
No. 8 - 40 Amps
The package includes:
1 x wiring diagram
2X 40A relay with harness
1 x 185\'f switch - 175\'f temperature switch
1 x 3 / 8 inch threaded probe
1x 3 / 8-inch to 1 / 2-inch adapter
2x inline fuse holders
2 x 20 amp fuse 8x ring terminals
4x fan tail connectors
Want to install a/c to your hot rod or operate thermostatic switch when a/c ON?
Choose this Electric Fan Relay Kit. Only a few minutes to install and your cooling fans will come on when the engine reaches the preset temperature of the thermostatic switch mounted in the engine head or when the a/c is turned on.
Will this cable longer enough to install?
The length of cable is 50cm(Please allow a measurement error of about 2-3cm), it will suitable for you to install it near or far from engine.
