This unit is in stock and can ship asap. This is a reverse airflow (port side exhaust) switch. This S6010 arrives with a 1 year hardware warranty.
1x Dell S6010-ON - 32-Port 40G QSFP+ Ports, Redundant AC PS, Fan Subsys, w/Airflow from I/O PNL to PS PNL 32-Port 40G QSFP+ Ports, Redundant AC PS, Fan Subsys, w/Airflow from PS PNL (reverse port side exhaust blue power and fan)
MSRP: $19,608.00
BIOS Boot Selector for S6010Version 3.26.0.0-3POST Configuration CPU Signature 406D8 CPU FamilyID=6, Model=4D, SteppingId=8, Processor=0 Microcode Revision 125 Platform ID: 0x10041A44 PMG_CST_CFG_CTL: 0x40006 BBL_CR_CTL3: 0x7E2801FF Misc EN: 0x840081 Gen PM Con1: 0x3008 Therm Status: 0x8853000F POST Control=0xEA000303, Status=0xE6008000BIOS initializations...CPGC Memtest ................................ PASSPOST: RTC Battery OK at last cold boot RTC date Monday 9/12/2023 16:17:57POST SPD test ............................... PASSPOST Lower DRAM Memory test.... Perf cnt (curr,fixed): 0x9E43B19D0,0x9F9EA5CA0POST Lower DRAM Memory test ................. PASSPOST Lower DRAM ECC check ................... PASSDxE POSTPOST Upper DRAM Memory test Short memory cell test....POST Upper DRAM Memory test ................. PASSPOST PCI test ............................... PASSPOST NVRAM check ............................ PASSPOST overall test results ................... PASSNVRAM: 00 9F 00 E6 03 03 00 EAVersion 2.17.1245. Copyright (C) 2017 American Megatrends, Inc.BIOS Date: 03/15/2017 12:12:46 Ver: 0ACBZ028Press <DEL> or <F2> to enter setup. GNU GRUB version 2.02~beta2+e4a1fe391 |*ONIE: Install OS | | ONIE: Rescue | | ONIE: Uninstall OS | | ONIE: Update ONIE | | ONIE: Embed ONIE | | EDA-DIAG | | | | | | | | | | | | | Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. The highlighted entry will be executed automatically in 0s. Booting `ONIE: Install OS'ONIE: OS Install Mode ... Version : 3.26.1.1Build Date: 2016-09-07T17:35-0700Info: Mounting kernel filesystems... done.Info: Mounting ONIE-BOOT on /mnt/onie-boot ...Installing for i386-pc platform.Installation finished. No error random: mktemp urandom read with 17 bits of entropy availablereported.Info: Using eth0 MAC address: 68:4f:64:16:11:98Info: Using eth1 MAC address: 68:4f:64:16:11:99Info: eth0: Checking link... down.ONIE: eth0: link down. Skipping configuration.Info: eth1: Checking link... down.ONIE: eth1: link down. Skipping configuration.ONIE: Failed to configure eth0 interfaceONIE: Failed to configure eth1 interfaceStarting: dropbear ssh daemon... done.Starting: telnetd... done.discover: installer mode detected. Running installer.Starting: discover... done.Please press Enter to activate this console. Info: eth0: Checking link...To check the install status inspect /var/log/onie.log.Try this: tail -f /var/log/onie.log** Installer Mode Enabled **ONIE:/ #Key features:
• 1RU high-density 10/40GbE ToR switch with 32 ports of40GbE (QSFP+) or 96 ports of 10GbE¹ and eight ports of40GbE
• Up to 2.56Tbps of switching I/O bandwidth (full duplex)and available non-blocking² cut-through switching fabricdelivering line- rate performance under full load² with sub600ns latency
• Scalable L2 and L3 Ethernet switching with QoS and afull complement of standards-based IPv4 VRF3 and IPv6features, including OSPF and BGP routing support
• L2 multipath support via Virtual Link Trunking (VLT)and multiple VLT (mVLT) multi-chassis link aggregationtechnology
• VXLAN gateway functionality³ support for bridging thenon-virtualized and the virtualized overlay networks withline rate performance
• Open Automation Framework adding automatedconfiguration and provisioning capabilities to simplify themanagement of network environments
• Modular Dell FTOS software delivering inherent stability aswell as enhanced monitoring and serviceability functions
• Jumbo frame support for large data transfers
• 128 link aggregation groups with up to 16 members pergroup, using enhanced hashing
• Redundant, hot-swappable power supplies and fans
• Converged network support for DCB, with priority flowcontrol (802.1Qbb), ETS (802.1Qaz), DCBx and iSCSI TLVsupport
• I/O panel to power supply airflow or power supply to I/Opanel airflow
• Tool-less enterprise ReadyRails™ mounting kits reducingtime and resources for switch rack installation
• Power-efficient operation up to 45°C helping reducecooling costs in temperature-constrained deployments
• Fastboot feature enables min-loss software upgrade on astandalone S6010 without VLT/stacking
• ROCE is also supported on S6010 enabling convergenceof compute and storage on Active Fabric
