PC-8000 Digital Logger Features
The PC-8000 power controller is a rack mount network-based power switch used to remotely control and reboot systems. The PC-8000 offers these features:
Web Interface
The internal web server is accessible from any standard web browser. Simply enter an IP address, and the power controller may be configured and controlled entirely over the web.
16 Switched Outlets
Eight switched circuits are provided, each with a pair of 110VAC outlets. Each pair of outlets can be controlled independently. The outlets are spaced properly to allow the use of AC adapters and large plugs.
Two Unswitched Outlets
Two unswitched circuits are provided for connection to “always on” devices.
Manual Override Controls
Front panel controls are provided to manually override software settings. Each outlet can be set on or off manually, or to “REM” for remote software control.
Password Security
Multiple levels of password security are provided to limit access to the power controller.
Sequenced “On Timer”
A programmable delay timer allows outlets to be switched on in sequence, rather than simultaneously. Using this timer, more equipment can be attached to a single circuit without overloading.
Important Factory Defaults
IP ADDRESS
The factory default IP address is 192.168.1.250
ADMINISTRATOR LOGIN
User name: admin (lower case)
Password: admin (lower case)
To reset the unit to factory defaults, press and hold the red button on the back of the power controller for sixty seconds while turning the power on an off.