Crypto Mining Motherboard Test Bench with GPU Stand / Desktop PC and Test RigFeatures and further details

• Details:This is a custom made motherboard stand at 60° angle. Its made forCPU Mining or a desktop pc rig. Its two pieces total (for the base model). Easy to setup and move around while keeping the motherboard components off of your desk or table. Supports ATX, Micro ATX, and Mini ITX motherboard sizes.

• Motherboard Stand:Put the motherboard on the its side and use 4 screws on the bottom halve of your motherboard to the four standoffs. NOTE- The motherboard will be upside down. You can use fine threaded or standard thicker threaded pc screws. Gentle turn each screw in as its threading the standoffs (its just plastic). After the motherboard leg is attached, place it up right (upside down for the motherboard). Next the left side has a dual SSD and HDD mount. Please note you need to mount the SSD first before the 3.5 in HDD. Next the right side has a PSU mount, be sure to use all 4 screws to secure the PSU tightly against the mount. Then route your cables to the motherboard and drives.

• GPU Stand Mount:Clean Black Plastic design has a minimalistic. Designed to have a perfectly fit around all GPUs. Whether single, dual, or triple slot cards, this stand should be able to support the weight. The stand has gaps underneath to route any cables to the riser or GPU. The stands can be connected together on the sides with a locking mechanism.

• If you need to buy more GPU style="font-size: 16px; box-sizing: border-box; margin-top: 30px; margin-bottom: 1rem;">
• Package Includes:The two motherboard legs.

If you have any questions be sure to ask.
*MOTHERBOARD & GPU NOT INCLUDED & SCREWS NOT INCLUDED*
Manufactured by 3D Print Master LLC