 When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Additional features the Creality CR-6 Max 3d printer will include:
Modular Nozzle: Creality designed the nozzle with modularity in mind. Users can disable the nozzle and change the heat block, heat sink, Teflon tube, or the nozzle tip with the included spares.
Extruder: The redesigned extruder should allow for easier feeding of filament.
Filament Sensor: The CR-6 Max 3d printer is equipped with a photoelectric filament sensor detecting any possible filament breakage or runout.
Resume Print Function: Outages or disconnections should be no problem for the CR-6 Max because it can fully recover and resume the print when it’s back up.
32-Bit Motherboard: The CR-6 SE reached one of its stretch goals on Kickstarter, meaning that both the SE and the Max will be delivered with a 32-bit motherboard for enhanced performance.
TMC2209 Motor Drivers: Another stretch goal, Creality will be adding TMC2209 motor drivers for more precise and quiet printing.
Mean Well Power Supply: Clarified in Creality’s latest update, the CR-6 SE and CR-6 Max will be shipping with high-quality Mean Well power supplies for extended hardware life and your peace of mind.
Specification:
CR-6 MAX FDM 3D Printer Properties
Modeling Technology: FDM（Fused Deposition Modeling）
Printing Size: 400x400x400mm
Supported Materials: PLA/TPU/PETG/ WOOD
File Transfer: USB/Memory card
CR-6 MAX FDM 3D Printer Hardware
Machine size : 725x640x691mm
Motherboard: Silent motherboard
Nominal Voltage: 100v-240v
Rated Power: 500W
Output Voltage: 24V
CR-6 MAX FDM 3D Printer Extruder Hardware
Layer Thickness: 0.1-0.4mm
Print Resolution: ±0.1mm
Nozzle Temperature: ≤260℃
Nozzle Diameter: 0.4mm as standar
Hotbed Temperature: ≤90℃Package Include:1*CR-6 MAX FDM 3D Printer1* English ManualFAQ:Q1:What should I do when the nozzle has the glue leakage?1. Heat the spray head to 230 degrees Celsius and keep the same temperature to remove the spray head kit; and then remove the heating block and throat separately. After removing, the spray head can heat to the lower temperature.
2. Prepare a bottle of red glue (available from Taobao), apply the red glue to the thread of the throat, let it rest for 1 minute, then reinstall the throat and heating block, and then install the nozzle kit back to the original Bit;
3. If there is still the same issue, please contact the after-sales customer service.Q2:How to deal with no reaction in hot bed heating?1. Please check whether the temperature display on the display is normal room temperature without giving the heating command. If it is not, it is likely to be a thermal problem, just replace with a new one;
2. Measure whether the output voltage of the hot bed port of the main board is 24V under heating. If there is no voltage, it is a main board problem and need to be replaced with a new main board. Otherwise, it is likely to be a problem with the hot bed board itself and need to be replaced.Q3:What should I do if the nozzle is heated without reaction?1. Under the condition of no heating, determine whether the temperature of the display screen is normal room temperature. if not, it is likely to be a thermal problem, please replace a new one;
2. Under the condition of the heating, test whether the output voltage of the nozzle port of the main board is 24V. If there is no voltage, it is the main board problem. Please replace the new main board. Otherwise, it is likely to be a heating tube problem. You need to replace the heating tube.Q4:Why the printer stop automatically stop during printing?1.Slicing problem, the slicing is unsuccessful or not completely exported, just re-slicing or waiting for the export progress buffer to be completed. 2.The file transfer is interrupted during the SD card printing process, please replace the SD card or format it to have a try. 3.If it's still the same issue, please contact the after-sale customer service.Q5:What should I do if the fan does not rotate or there is noise?1. Clean the fan and check whether there is debris interference ;
2. Check whether the screws and fan cover are loose, and then re-fix it;
3. Check if the fan blade is damaged or broken, please replace a new fan.Q6:What should I do if the card slot does not respond to card reading?1. Format the SD card;
2. Check whether the card slot is loose;
3. Please clean the card slot with alcohol to oxidize it;
4. Replace the card slot / motherboard.
|
|
