Compact and Efficient USBC for pd2 0 3 0 Voltage Tester for Electronic
DESCRIPTION
Features:
* Industrial grade voltage resistance of 20V between any two terminals. Input voltage anti-reverse connection.
* Effectively prevent VBUS short circuit to CC burning during testing.
* Very suitable for test fixtures to directly measure for bare modules, no assembly required.
* DIY fast charging with. No hardware switch, not easy to accidentally touch the voltage.
* When using 5A-EMARK line DIY, it supports up to 100W, with excellent compatibility.
* The hole spacing is 2.54mm, which is convenient for soldering pins to other motherboards.
* Pin grounding is equivalent to a button, and can be triggered by optocoupler or relay isolation.
* If CC1 or CC2 is connected to a male connector, only of them needs to be name: Fast charge trigger detector
for Type (optional): ZY12PDN for bare board, ZY12PDN with USB, ZY12PDN with terminals
Color: as shown
Material: PCB circuit board
Size: standard
Power: 100W
Voltage: 3-20V
Current: 0-5A
Instructions for use:
After power on, ZY12PDS will enter for PD mode by default. The colorful lights will show a stable red color, indicating that the default 5V has been applied. If the adapter supports more voltages, you can click the touch switch to switch the output voltage. The colorful lights will light up stably (red, yellow, green, cyan, blue, purple, and white) to show the corresponding 1-7 voltage and current groups actually applied for the adapter output. If the adapter does not support for PD mode, the connection timeout is abnormal or the application is not responded, the colorful lights will for flash red.
Mode setting;
When powered on, the colorful lights will for flash a color to indicate the current working mode. Press and hold the button to power on. After the colorful lights for flash quickly, release your hand to enter the setting. Short press to switch the color of the colorful lights, long press to turn the lights to save.
Colorful light colors correspond to functions;
Red: Press button to change voltage
Yellow: Apply for 8-10V
Green: Apply for 11-13V
Cyan: Apply for 14-16V
Blue: Apply for 18-20V
Purple: Apply for high voltage
White: Poll all supported voltages
Apply for high voltage for logic: If broadcasting 5, 9, 20, 20, 15V, apply for 20V. Apply for the higher voltage value in the broadcast. If there are multiple same high values, apply for the latter
Apply for fixed voltage for logic: If the setting is 14-16V, broadcasting 5, 14, 16, 15, 12V, apply for 15V, and apply for the latter voltage in the broadcast range
Package Contents:
1 x Fast Charge Trigger Detector
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the only ship to confirmed Order addresses.Please comfirm that your Order address is in line with your shipping address.
Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.
It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of thebad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further must be completed within 5 days. If you have any problems about payment, please contact us via message.
We strive for 100% customer satisfaction! Positive response is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.
