85300008

ForNetScaler SDX andUniversal Rail, 4-post rack

Citrix P/N 85300008 Universal Rail, 4-post rack, Rack depth 23-33" Inch range

View pictures for details

Item

Box Contents

2 Adjustable Rail Assembly

2 Fixed Bracket, 1U Appliance (P/N TTS-UAR-1001-00)

2 Fixed Bracket, 2U Appliance (P/N TTS-UAR-1002-00)

10 Pan Head Screw, Philips, M4 X 5mm Long

4 Pan Head Screw, Philips, #10-32 X 1/2 Inch Long

4 Square Nut Retainer Tinnerman Clip, #10-32

1 Instructions (This documentation)

watch YouTube

How to rack mount a Citrix ADC hardware style="box-sizing: border-box; margin: 0px 0px 1rem 1.25rem; padding: 0px; list-style-position: outside; line-height: 1.5625rem; font-size: 16px; font-family: "Public Sans", sans-serif; outline: none !important;">

Repeat steps 1 through 3 to install the left inner rail on the other side of the appliance.

Install the rack rails on the rack

1. If you have a round-hole, threaded rack, skip to step 3.
2. Install square nut retainers into the front post and back post of the rack as shown in the following figures. Before inserting a screw, be sure to align the square nut with the correct hole for your 1U or 2U appliance. The three holes are not evenly spaced. Figure 2. Installing Retainers into the Front Rack PostsFigure 3. Installing Retainers into the Rear Rack Posts
3. Install the adjustable rail assembly into the rack as shown in the following figures. Use a screw to lock the rear rail flange into the rack. With the screw securing the rail in place, you can optionally remove the latching spring. Figure 4. Installing the Rail Assembly to the Rack

Install the appliance in the rack

1. Align the inner rails, attached to the appliance, with the rack rails.
2. Slide the appliance into the rack rails, keeping the pressure even on both sides.

3. Verify that the appliance is locked in place by pulling it all the way out from the rack. Figure 5. Rack Mounting the Appliance

Watch this quick video abouthow to rack mount a NetScaler hardware appliance.