TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
The unit has been reset to the factory default settings. See console log below.
COMPONENTS INCLUDED IN THIS sale:• (1) - CISCO SG550X-48MP-K9 V01 48-PORT POE STACKABLE L3 MANAGED GIGABIT SWITCH
• (1) - POWER CORD
• (1) - PAIR OF RACKMOUNT EARS
REPLACEMENT or MONEY BACK GUARANTEE:When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.
ADDITIONAL INFORMATION:The following is the Console Log from this item:
***************** SYSTEM RESET *****************
[ 1300.553473] reboot: Restarting system
BootROM 1.41
Booting from NAND flash
MTL, DNI MPP 13 output high..
General initialization - Version: 1.0.0
Serdes initialization - Version: 1.0.2
** Link is Gen1, check the EP capability
PEX: pexIdx 0, Link upgraded to Gen2 based on client cpabilities
DDR3 Training Sequence - Ver TIP-1.22.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
BootROM: Image checksum verification PASSED
ROS Booton: Jul 26 2015 14:46:31
Press x to choose XMODEM...
Booting from NAND flash
Running UBOOT...
U-Boot 2013.01 (Jan 03 2021 - 02:50:15) version: 2014_T3.0 V3.5.7.12
NAND ID = 0xDA2C
NAND Model = Micron 2Gb 8bit ABAEA
Loading system/images/active-image ...
[ 15.356507] I2C frequency 100 kHz (Tclk 200 MHz, freq_m 12, freq_n 3)
BOOTP ubi: Starting Boot...
MAC address : 40:a6:e8:e7:0d:48.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
*** Running SW Ver. 2.5.7.82 Date Jan 3 2021 Time 02:47:09 ***
HW Revision is V01
Serial Number is DNI200307ZX
Base Mac address is: 40:a6:e8:e7:0d:48
Dram size is : 512M bytes
Flash size is: 256M
03-Jan-2021 02:48:12 %CDB-I-LOADCONFIG: Loading running configuration.
03-Jan-2021 02:48:12 %CDB-I-LOADCONFIG: Loading startup configuration.
Device configuration:
Slot 1 - SG550X-48MP
Device 0: CPSS_98DX3336
Device 1: CPSS_98DX3336
CPLD version is: 0x01
CPU speed: 800 MHz
Coredump mode 1 (disabled)
--------------------------------
Unit factory default
--------------------------------
03-Jan-2021 02:49:34 %INIT-I-InitCompleted: Initialization task is completed
>
--------------------------------
Unit number 1 active enabled
--------------------------------
03-Jan-2021 02:49:48 %MLDP-I-CONTROLLER: Switching to the active mode.
03-Jan-2021 02:49:55 %SNMP-I-CDBITEMSNUM: Number of running configuration items
loaded: 0
03-Jan-2021 02:49:55 %SNMP-I-CDBITEMSNUM: Number of startup configuration items
loaded: 0
The SSH Server is generating a default RSA key.
This may take a few minutes, depending on the key size.
03-Jan-2021 02:50:05 %Environment-W-RPS-STAT-MSG: Power supply source changed to
Main Power Supply.
03-Jan-2021 02:50:05 %Entity-I-SEND-ENT-CONF-CHANGE-TRAP: entity configuration c
hange trap.
03-Jan-2021 02:50:16 %Environment-I-FAN-STAT-CHNG: FAN# 1 status changed to oper
ational.
03-Jan-2021 02:50:16 %Environment-I-FAN-STAT-CHNG: FAN# 2 status changed to oper
ational.
03-Jan-2021 02:50:16 %Environment-I-FAN-STAT-CHNG: FAN# 3 status changed to oper
ational.
03-Jan-2021 02:50:16 %Environment-I-FAN-STAT-CHNG: FAN# 4 status changed to oper
ational.
03-Jan-2021 02:50:16 %Environment-I-FAN-STAT-CHNG: FAN# 5 status changed to oper
ational.
The SSH Server is generating a default DSA key.
This may take a few minutes, depending on the key size.
The SSH Client is generating a default RSA key.
This may take a few minutes, depending on the key size.
The SSH Client is generating a default DSA key.
This may take a few minutes, depending on the key size.
03-Jan-2021 02:50:34 %SYSLOG-N-LOGGING: Logging started.
03-Jan-2021 02:50:37 %SSL-N-SSLCTASK: Starting autogeneration of self-signed cer
tificate - 2048 bits
Generating RSA private key, 2048 bit long modulus
03-Jan-2021 02:50:41 %SSL-N-SSLCTASK: Autogeneration of self-signed certificate
was successfully completed
Generating RSA private key, 2048 bit long modulus
>lcli
Console baud-rate auto detection is enabled, press Enter twice to complete the d
etection process
User Name:
Detected speed: 115200
User Name:cisco
Password:*****
Please change device default username AND password.
Change of credentials is required for better protection of your network.
Please note that the new password must comply to the following password complexi
ty rules:
1. The password must be at least 8 characters long.
2. Password must contain at least 3 of the following types: lowercase le
tters, uppercase letters, numeric digits or special characters.
3. A character can not be repeated consecutively more than 3 times.
4. The password cannot be identical to the username or a reversed form o
f username.
5. The password cannot be identical to the manufacturer name or a revers
ed form of manufacturer name.
Enter new username: Please Click Here to Visit Our StoreSearchBy36 - 259185 | Loc: G54 | L: Rob |T: Rob | PM: Nick | QTY: 0| Plan: L1- Q2 5 pounds or more |22.00\"x21.00\"x5.00\"23.00lbs |Start: $0.00 | BIN: $349.99 | |2024-03-15 ||Computers/Tablets & Networking::Enterprise Networking, Servers::Switches & Hubs::Network Switches
